notifications upon start/pause/finish of print
-
@torin Those letters are abbreviations for the different machine states (see here), so
idle
is equal toI
. -
@chrishamm Many thanks for that, it definitely extends what I've seen.
However I am missing a 'final status' if that makes sense e.g. there's the status for cancelling yet there's no cancelled status or processing and no processed which makes it hard to understand and put the proper function in place to determine final status without hammering the API and making a request every let say 100ms which could still lead to some false positives. -
This may help. Its some of the logic in DuetLapse3. It ends up being a bit convoluted .... and of course I have a bunch of defensive coding in here (for other reasons).
The main logic starts at line 16.Any yes - it can do with a bit of tidying up
def captureLoop(): # Run as a thread global printState, duetStatus, captureLoopState if connectionState is False: return captureLoopState = 1 printState = 'Not Capturing' lastDuetStatus = 'idle' # logical state on start of each thread instance logger.debug('Starting Capture Loop') while captureLoopState == 1: # Set to 0 to stop. e.g By http listener or SIGINT or CTL+C if duetStatus != lastDuetStatus: # What to do next? logger.info('****** Duet status changed to: ' + str(duetStatus) + ' *****') # logical states for printer are printing, completed if duetStatus == 'idle' and printState in ['Capturing', 'Busy'] and terminateState != 1: # Capturing is finished without being commanded printState = 'Completed' logger.debug('****** Print State changed to ' + printState + ' *****') elif duetStatus in ['processing', 'idle'] or (duetStatus == 'paused' and detect == 'pause'): printState = 'Capturing' logger.debug('****** Print State changed to: ' + printState + ' *****') elif duetStatus == 'busy': printState = 'Busy' logger.debug('****** Print State changed to: ' + printState + ' *****') else: printState = 'Waiting' logger.info('****** Print State changed to: ' + printState + ' *****') if printState == 'Capturing': oneInterval('Camera1', camera1, weburl1, camparam1) if camera2 != '': oneInterval('Camera2', camera2, weburl2, camparam2) unPause() # Nothing should be paused at this point elif printState == 'Completed': logger.info('Print Job Completed') printState = 'Not Capturing' # use a thread here as it will allow this thread to close. startnextAction('completed') break # Do not want to wait to end if captureLoopState == 1 and terminateState != 1 and connectionState: # If still running then sleep lastDuetStatus = duetStatus time.sleep(poll) printState = 'Not Capturing' captureLoopState = -1 return # End of captureLoop
-
Hey folks,
I want to share a download link with the version that should now work with v2 and v3 API.
If you could test it and let me know if it's all good that we'd be great and I will release it officially.Only change you need to make is additional entry in your configuration file adding api_version in the connection section(v2 or v3) e.g.:
connection: host: 192.168.0.11 polling_time: 30 error_count: 5 api_version: v3
Without further ado:
https://1drv.ms/u/s!Aq3gq6mIQqpsisE-e3Adz3wsP6dAJwLink is going to expire in 2 weeks, after that I will just merge it
-
Don't know if this is interesting for you but may avoid having the user input the version /model info. Its Python, but the logic will be the same.
def getDuetVersion(model): # Used to get the API and version information from Duet if model == '' or model == 'rr_model': URL = ('http://' + duet + '/rr_model?key=boards') r = urlCall(URL, 3, False) if r.ok: #The API type is rr_model try: j = json.loads(r.text) version = j['result'][0]['firmwareVersion'] return 'rr_model', version except: pass if model == '' or model == 'SBC': # model = '/machine/status' URL = ('http://' + duet + '/machine/status') r = urlCall(URL, 3, False) if r.ok: try: j = json.loads(r.text) version = j['boards'][0]['firmwareVersion'] return 'SBC', version except: pass
-
@stuartofmt Cool. I'll have a look tomorrow (that is if I will survive tomorrow heatwave...). Cheers buddy.
-
Ha! - good day to be indoors and futzing with play code
Good Luck. BTW what programming language are you using?
Part of the reason I ask is that I also have some code for using gmail.I don't actually use your program as I use DuetMonitor (which only supports gmail) - but it you wanted to extend your connection capabilities - I can sling it in your direction.
I -
@stuartofmt Ah that's quite cool. I've already put that in, however I stripped in my case and just checked for the appropriate content-type header on each URL, in both cases it should be app/json, otherwise it's just wrong.
I'm doing it all in golang, since it's quite nice for such nice things and portability and lack of dependencies.
I have notifications for any email service assuming it can do smtp so should in theory work everywhere. Can you point me to this duetmonitor? First time I'm hearing about this and haven't seen it.If you want to poke around code and see what's there, that's the current that will go to master soon.
https://gitlab.com/Toriniasty/reprap_notify/-/tree/feature/apiV3/ -
@torin I tried the new version but could not get past identifying v2 of v3 firmware.
Printer is a Duet3 6HC in SBC mode, attached to a Jetson Nano (arm64). That name Nano also runs your project.
Top of rrnotity.yaml looks like this (dwc is running on port 8080)
connection: host: localhost:8080 polling_time: 5 error_count: 50 api_version: v3
Running the rr_notify results is this output:
2022/07/19 00:40:18 Detecting API version... 2022/07/19 00:40:18 Couldn't identify v2 or v3 firmware panic: Couldn't identify v2 or v3 firmware goroutine 1 [running]: log.Panicf({0x463b71?, 0x454fd0?}, {0x0?, 0x1?, 0x400022a030?}) /usr/local/go/src/log/log.go:392 +0x6c main.main() /builds/Toriniasty/reprap_notify/cmd/rr_notify/main.go:71 +0x46c
I am not sure how to proceed from here or how to debug. ¯_(ツ)_/¯
-
@torin said in notifications upon start/pause/finish of print:
Can you point me to this duetmonitor? First time I'm hearing about this and haven't seen it.Here is DuetMonitor
https://forum.duet3d.com/topic/23282/duetmonitor -
@nxt-1 hiya, would you be able to provide me output from these two commands(run from the nano itself):
curl -v http://localhost:8080/machine/system curl -v http://localhost:8080/rr_model?key=boards
?
-
@torin They result in a 404 for both, though I would not be able to guess why since the base address does seem to be reachable, though understandably complaining about the lack of JS.
curl -v http://localhost:8080/rr_model?key=boards * Trying 127.0.0.1... * TCP_NODELAY set * Connected to localhost (127.0.0.1) port 8080 (#0) > GET /rr_model?key=boards HTTP/1.1 > Host: localhost:8080 > User-Agent: curl/7.58.0 > Accept: */* > < HTTP/1.1 404 Not Found < Content-Length: 0 < Date: Tue, 19 Jul 2022 14:44:56 GMT < Server: Kestrel < * Connection #0 to host localhost left intact
curl -v http://localhost:8080 * Rebuilt URL to: http://localhost:8080/ * Trying 127.0.0.1... * TCP_NODELAY set * Connected to localhost (127.0.0.1) port 8080 (#0) > GET / HTTP/1.1 > Host: localhost:8080 > User-Agent: curl/7.58.0 > Accept: */* > < HTTP/1.1 200 OK < Content-Length: 1441 < Content-Type: text/html < Date: Tue, 19 Jul 2022 14:47:27 GMT < Server: Kestrel < Accept-Ranges: bytes < ETag: "1d8772d0a7368a1" < Last-Modified: Fri, 03 Jun 2022 09:33:54 GMT < <!DOCTYPE html><html lang="en"><head><meta charset="utf-8"><meta http-equiv="X-UA-Compatible" content="IE=edge"><meta name="viewport" content="width=device-width,initial-scale=1,user-scalable=0"><!--[if IE]><link rel="icon" href="/favicon.ico"><![endif]--><title>Duet Web Control</title><link href="/css/app.62f87138.css" rel="preload" as="style"><link href="/js/app.d9dc885b.js" rel="preload" as="script"><link href="/css/app.62f87138.css" rel="stylesheet"><link rel="icon" type="image/png" sizes="32x32" href="/img/icons/favicon-32x32.png"><link rel="icon" type="image/png" sizes="16x16" href="/img/icons/favicon-16x16.png"><link rel="manifest" href="/manifest.json"><meta name="theme-color" content="#2196f3"><meta name="apple-mobile-web-app-capable" content="yes"><meta name="apple-mobile-web-app-status-bar-style" content="black"><meta name="apple-mobile-web-app-title" content="Duet Web Control"><link rel="apple-touch-icon" href="/img/icons/apple-touch-icon-152x152.png"><link rel="mask-icon" href="/img/icons/safari-* Connection #0 to host localhost left intact pinned-tab.svg" color="#2196f3"><meta name="msapplication-TileImage" content="/img/icons/msapplication-icon-144x144.png"><meta name="msapplication-TileColor" content="#000000"></head><body><noscript><strong>We're sorry but Duet Web Control does not work properly without JavaScript enabled. Please enable it to continue.</strong></noscript><div id="app"></div><script src="/js/app.d9dc885b.js"></script```
-
@nxt-1 Right, so the second paste is wrong and missing URI and I had a thought as well, since there's '?' in URI bash might be screwing around with it try again with:
curl -v http://localhost:8080/machine/system curl -v "http://localhost:8080/rr_model?key=boards"
-
@torin said in notifications upon start/pause/finish of print:
@nxt-1 Right, so the second paste is wrong and missing URI
I did in fact ment to post it without URI, just to show that can I fact make a connection.
Here's the two requests, as requested
curl -v http://localhost:8080/machine/system * Trying 127.0.0.1... * TCP_NODELAY set * Connected to localhost (127.0.0.1) port 8080 (#0) > GET /machine/system HTTP/1.1 > Host: localhost:8080 > User-Agent: curl/7.58.0 > Accept: */* > < HTTP/1.1 404 Not Found < Content-Length: 0 < Date: Tue, 19 Jul 2022 15:39:09 GMT < Server: Kestrel < * Connection #0 to host localhost left intact
curl -v "http://localhost:8080/rr_model?key=boards" * Trying 127.0.0.1... * TCP_NODELAY set * Connected to localhost (127.0.0.1) port 8080 (#0) > GET /rr_model?key=boards HTTP/1.1 > Host: localhost:8080 > User-Agent: curl/7.58.0 > Accept: */* > < HTTP/1.1 404 Not Found < Content-Length: 0 < Date: Tue, 19 Jul 2022 15:39:18 GMT < Server: Kestrel < * Connection #0 to host localhost left intact
-
@nxt-1 That's bit odd according to the previous post it should be either one of those two URLs.
@stuartofmt / @chrishamm any idea why either doesn't work?
-
@torin It's
/machine/status
, not/machine/system
. Support forrr_
requests will come in v3.5. -
@chrishamm Awesome, thanks for the great spot, not sure how I missed it.
@Nxt-1 would you mind giving it another go please? also api_version not needed anymore, software will try to detect it automatically.
-
@torin
/machine/status
does give me a wall of json output .curl -v http://localhost:8080/machine/status * Trying 127.0.0.1... * TCP_NODELAY set * Connected to localhost (127.0.0.1) port 8080 (#0) > GET /machine/status HTTP/1.1 > Host: localhost:8080 > User-Agent: curl/7.58.0 > Accept: */* > < HTTP/1.1 200 OK < Content-Length: 14094 < Content-Type: application/json < Date: Wed, 20 Jul 2022 13:45:18 GMT < Server: Kestrel < {"boards":[{"accelerometer":null,"bootloaderFileName":null,"canAddress":0,"closedLoop":null,"directDisplay":null,"firmwareDate":"2022-06-01","firmwareFileName":"Duet3Firmware_MB6HC.bin","firmwareName":"RepRapFirmware for Duet 3 MB6HC","firmwareVersion":"3.4.1","iapFileNameSBC":"Duet3_SBCiap32_MB6HC.bin","iapFileNameSD":"Duet3_SDiap32_MB6HC.bin","maxHeaters":32,"maxMotors":6,"mcuTemp":{"current":44,"min":39.8,"max":50.4},"name":"Duet 3 MB6HC","shortName":"MB6HC","state":"unknown","supports12864":false,"supportsDirectDisplay":false,"uniqueId":"08DJM-9P63L-DJMSS-6JKD0-3S06T-9AF79","v12":{"current":12.3,"min":12.2,"max":12.4},"vIn":{"current":32.1,"min":31.9,"max":32.3}}],"directories":{"filaments":"0:/filaments/","firmware":"0:/firmware/","gCodes":"0:/gcodes/","macros":"0:/macros/","menu":"0:/menu/","scans":"0:/scans/","system":"0:/sys","web":"0:/www/"},"fans":[{"actualValue":0,"blip":0.1,"frequency":2000,"max":0.7,"min":0,"name":"Compressor","requestedValue":0,"rpm":-1,"thermostatic":{"heaters":[],"highTemperature":null,"lowTemperature":null}},{"actualValue":1,"blip":0.1,"frequency":25000,"max":1,"min":0,"name":"Duet","requestedValue":1,"rpm":2039,"thermostatic":{"heaters":[],"highTemperature":null,"lowTemperature":null}},{"actualValue":1,"blip":0.1,"frequency":25000,"max":1,"min":0,"name":"Pump","requestedValue":1,"rpm":4539,"thermostatic":{"heaters":[],"highTemperature":null,"lowTemperature":null}}],"global":{},"heat":{"bedHeaters":[0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1],"chamberHeaters":[-1,-1,-1,-1],"coldExtrudeTemperature":160,"coldRetractTemperature":90,"heaters":[{"active":0,"avgPwm":0,"current":33.6,"max":150,"min":-273.1,"model":{"coolingExp":1.4,"coolingRate":0.138,"deadTime":19.5,"enabled":true,"fanCoolingRate":0,"heatingRate":0.577,"inverted":false,"maxPwm":1,"pid":{"d":0.849,"i":0.0008,"overridden":false,"p":0.06221,"used":true},"standardVoltage":0},"monitors":[{"action":1,"condition":"tooHigh","limit":150},{"action":0,"condition":"disabled","limit":0},{"action":0,"condition":"disabled","limit":0}],"sensor":0,"standby":0,"state":"off"},{"active":0,"avgPwm":0,"current":29.2,"max":285,"min":-273.1,"model":{"coolingExp":1.4,"coolingRate":0.319,"deadTime":5.4,"enabled":true,"fanCoolingRate":0.038,"heatingRate":1.825,"inverted":false,"maxPwm":1,"pid":{"d":0.268,"i":0.0029,"overridden":false,"p":0.07116,"used":true},"standardVoltage":32.1},"monitors":[{"action":0,"condition":"tooHigh","limit":285},{"action":0,"condition":"disabled","limit":0},{"action":0,"condition":"disabled","limit":0}],"sensor":1,"standby":0,"state":"off"}]},"httpEndpoints":[],"inputs":[{"axesRelative":false,"compatibility":"RepRapFirmware","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"HTTP","stackDepth":0,"state":"idle","lineNumber":0,"volumetric":false},{"axesRelative":false,"compatibility":"Marlin","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"Telnet","stackDepth":0,"state":"idle","lineNumber":0,"volumetric":false},{"axesRelative":false,"compatibility":"RepRapFirmware","distanceUnit":"mm","drivesRelative":true,"feedRate":10.5,"inMacro":false,"macroRestartable":false,"name":"File","stackDepth":0,"state":"idle","lineNumber":270768,"volumetric":false},{"axesRelative":false,"compatibility":"Marlin","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"USB","stackDepth":0,"state":"idle","lineNumber":0,"volumetric":false},{"axesRelative":false,"compatibility":"RepRapFirmware","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"Aux","stackDepth":0,"state":"reading","lineNumber":7,"volumetric":false},{"axesRelative":false,"compatibility":"RepRapFirmware","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"Trigger","stackDepth":0,"state":"idle","lineNumber":0,"volumetric":false},{"axesRelative":false,"compatibility":"RepRapFirmware","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"Queue","stackDepth":0,"state":"idle","lineNumber":270768,"volumetric":false},{"axesRelative":false,"compatibility":"RepRapFirmware","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"LCD","stackDepth":0,"state":"idle","lineNumber":0,"volumetric":false},{"axesRelative":false,"compatibility":"RepRapFirmware","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"SBC","stackDepth":0,"state":"idle","lineNumber":0,"volumetric":false},{"axesRelative":false,"compatibility":"RepRapFirmware","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"Daemon","stackDepth":0,"state":"idle","lineNumber":0,"volumetric":false},{"axesRelative":false,"compatibility":"RepRapFirmware","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"Aux2","stackDepth":0,"state":"idle","lineNumber":0,"volumetric":false},{"axesRelative":false,"compatibility":"RepRapFirmware","distanceUnit":"mm","drivesRelative":true,"feedRate":50,"inMacro":false,"macroRestartable":false,"name":"Autopause","stackDepth":0,"state":"idle","lineNumber":0,"volumetric":false}],"job":{"build":null,"duration":null,"file":{"filament":[7056],"fileName":null,"generatedBy":"Simplify3D(R) Version 4.1.2","height":33.1,"lastModified":"2022-07-17T15:13:52","layerHeight":0.2,"numLayers":165,"printTime":7380,"simulatedTime":4309,"size":7460736,"thumbnails":[]},"filePosition":7460476,"lastDuration":4298,"lastFileName":"0:/gcodes/LampAdapter.gcode","lastFileAborted":false,"lastFileCancelled":false,"lastFileSimulated":false,"layer":null,"layers":[],"layerTime":null,"pauseDuration":null,"rawExtrusion":null,"timesLeft":{"filament":null,"file":null,"slicer":null},"warmUpDuration":null},"limits":{"axes":15,"axesPlusExtruders":25,"bedHeaters":12,"boards":21,"chamberHeaters":4,"drivers":26,"driversPerAxis":8,"extruders":16,"extrudersPerTool":10,"fans":20,"gpInPorts":32,"gpOutPorts":32,"heaters":32,"heatersPerTool":20,"monitorsPerHeater":3,"restorePoints":6,"sensors":56,"spindles":4,"tools":50,"trackedObjects":40,"triggers":32,"volumes":1,"workplaces":9,"zProbeProgramBytes":8,"zProbes":4},"messages":[],"move":{"axes":[{"acceleration":1000,"babystep":0,"current":2400,"drivers":["0.2"],"homed":false,"jerk":400,"letter":"X","machinePosition":-5.392,"max":200,"maxProbed":false,"microstepping":{"interpolated":true,"value":16},"min":-200,"minProbed":false,"percentCurrent":100,"percentStstCurrent":71,"speed":10000,"stepsPerMm":160,"userPosition":-5.365,"visible":true,"workplaceOffsets":[0,0,0,0,0,0,0,0,0]},{"acceleration":1000,"babystep":0,"current":2400,"drivers":["0.1"],"homed":false,"jerk":400,"letter":"Y","machinePosition":-24.104,"max":200,"maxProbed":false,"microstepping":{"interpolated":true,"value":16},"min":-200,"minProbed":false,"percentCurrent":100,"percentStstCurrent":71,"speed":10000,"stepsPerMm":160,"userPosition":-23.984,"visible":true,"workplaceOffsets":[0,0,0,0,0,0,0,0,0]},{"acceleration":1000,"babystep":0,"current":2400,"drivers":["0.0"],"homed":false,"jerk":400,"letter":"Z","machinePosition":133.866,"max":770.05,"maxProbed":false,"microstepping":{"interpolated":true,"value":16},"min":0,"minProbed":false,"percentCurrent":100,"percentStstCurrent":71,"speed":10000,"stepsPerMm":160,"userPosition":133.2,"visible":true,"workplaceOffsets":[0,0,0,0,0,0,0,0,0]}],"calibration":{"final":{"deviation":0.037,"mean":0},"initial":{"deviation":0.038,"mean":-0.033},"numFactors":8},"compensation":{"fadeHeight":null,"file":null,"liveGrid":null,"meshDeviation":null,"probeGrid":{"axes":["X","Y"],"maxs":[188.8,188.8],"mins":[-188.7,-188.7],"radius":190,"spacings":[41.9,41.9]},"skew":{"compensateXY":true,"tanXY":0,"tanXZ":0,"tanYZ":0},"type":"none"},"currentMove":{"acceleration":0,"deceleration":0,"laserPwm":null,"requestedSpeed":0,"topSpeed":0},"extruders":[{"acceleration":3000,"current":750,"driver":"0.3","filament":"","factor":1,"jerk":2000,"microstepping":{"interpolated":true,"value":16},"nonlinear":{"a":0,"b":0,"upperLimit":0.2},"percentCurrent":100,"percentStstCurrent":71,"position":7053.9,"pressureAdvance":0.14,"rawPosition":7054.8,"speed":10000,"stepsPerMm":414}],"idle":{"factor":0.6,"timeout":30},"kinematics":{"deltaRadius":231.522,"homedHeight":770.057,"printRadius":200,"towers":[{"angleCorrection":-0.02,"diagonal":501.3,"endstopAdjustment":0.413,"xPos":-200.544,"yPos":-115.692},{"angleCorrection":-0.091,"diagonal":501.3,"endstopAdjustment":-0.814,"xPos":200.319,"yPos":-116.08},{"angleCorrection":0,"diagonal":501.3,"endstopAdjustment":0.402,"xPos":0,"yPos":231.522}],"xTilt":-0.009,"yTilt":0.003,"name":"delta","segmentation":null},"limitAxes":true,"noMovesBeforeHoming":true,"printingAcceleration":20000,"queue":[{"gracePeriod":0.01,"length":60},{"gracePeriod":0.01,"length":5}],"rotation":{"angle":0,"centre":[0,0]},"shaping":{"amplitudes":[],"damping":0.1,"durations":[],"frequency":40,"minAcceleration":0,"type":"none"},"speedFactor":1,"travelAcceleration":20000,"virtualEPos":0,"workplaceNumber":0},"network":{"corsSite":null,"hostname":"server","interfaces":[{"activeProtocols":[],"actualIP":null,"configuredIP":null,"dnsServer":"127.0.0.53","firmwareVersion":null,"gateway":null,"mac":"AE:A2:57:DA:70:FA","numReconnects":null,"signal":null,"speed":0,"state":"disabled","subnet":null,"type":"lan"},{"activeProtocols":[],"actualIP":null,"configuredIP":null,"dnsServer":"127.0.0.53","firmwareVersion":null,"gateway":null,"mac":"48:B0:2D:3D:3E:E4","numReconnects":null,"signal":null,"speed":10,"state":"disabled","subnet":null,"type":"lan"},{"activeProtocols":[],"actualIP":null,"configuredIP":null,"dnsServer":"127.0.0.53","firmwareVersion":null,"gateway":null,"mac":"A6:73:89:4F:B4:35","numReconnects":null,"signal":null,"speed":0,"state":"disabled","subnet":null,"type":"lan"},{"activeProtocols":[],"actualIP":null,"configuredIP":null,"dnsServer":"127.0.0.53","firmwareVersion":null,"gateway":null,"mac":"A6:73:89:4F:B4:35","numReconnects":null,"signal":null,"speed":0,"state":"disabled","subnet":null,"type":"lan"},{"activeProtocols":[],"actualIP":null,"configuredIP":null,"dnsServer":"127.0.0.53","firmwareVersion":null,"gateway":null,"mac":"A6:73:89:4F:B4:37","numReconnects":null,"signal":null,"speed":0,"state":"disabled","subnet":null,"type":"lan"},{"activeProtocols":[],"actualIP":"172.17.0.1","configuredIP":"172.17.0.1","dnsServer":"127.0.0.53","firmwareVersion":null,"gateway":null,"mac":"02:42:A8:9B:B4:7D","numReconnects":null,"signal":null,"speed":0,"state":"disabled","subnet":"255.255.0.0","type":"lan"},{"activeProtocols":[],"actualIP":"192.168.178.22","configuredIP":"192.168.178.22","dnsServer":"127.0.0.53","firmwareVersion":null,"gateway":"192.168.178.1","mac":"58:96:1D:13:6F:0A","numReconnects":null,"signal":-71,"speed":0,"state":"active","subnet":"255.255.255.0","type":"wifi"}],"name":"server"},"plugins":{},"scanner":{"progress":0,"status":"D"},"sensors":{"analog":[{"lastReading":33.6,"name":"Bed","type":"thermistor"},{"lastReading":29.2,"name":"Hotend","type":"thermistor"}],"endstops":[{"highEnd":true,"triggered":false,"type":"inputPin"},{"highEnd":true,"triggered":false,"type":"inputPin"},{"highEnd":true,"triggered":false,"type":"inputPin"}],"filamentMonitors":[],"gpIn":[],"probes":[{"calibrationTemperature":25,"deployedByUser":false,"disablesHeaters":false,"diveHeight":5,"lastStopHeight":-0.116,"maxProbeCount":10,"offsets":[0,0,0.1],"recoveryTime":0.5,"speeds":[1000,1000],"temperatureCoefficients":[0,0],"threshold":100,"tolerance":0.03,"travelSpeed":10000,"triggerHeight":-0.1,"type":8,"value":[0]}]},"spindles":[{"active":0,"canReverse":false,"current":0,"frequency":0,"min":60,"max":10000,"state":"unconfigured"},{"active":0,"canReverse":false,"current":0,"frequency":0,"min":60,"max":10000,"state":"unconfigured"},{"active":0,"canReverse":false,"current":0,"frequency":0,"min":60,"max":10000,"state":"unconfigured"},{"active":0,"canReverse":false,"current":0,"frequency":0,"min":60,"max":10000,"state":"unconfigured"}],"state":{"atxPower":null,"atxPowerPort":null,"beep":null,"currentTool":0,"deferredPowerDown":null,"displayMessage":"","dsfVersion":"3.4.1","dsfPluginSupport":true,"dsfRootPluginSupport":false,"gpOut":[],"laserPwm":null,"logFile":null,"logLevel":"off","messageBox":null,"machineMode":"FFF","macroRestarted":false,"msUpTime":230,"nextTool":0,"pluginsStarted":false,"powerFailScript":"","previousTool":-1,"restorePoints":[{"coords":[0,0,0],"extruderPos":0,"fanPwm":0,"feedRate":50,"ioBits":0,"laserPwm":null,"spindleSpeeds":[],"toolNumber":-1},{"coords":[0,0,0],"extruderPos":0,"fanPwm":0,"feedRate":50,"ioBits":0,"laserPwm":null,"spindleSpeeds":[],"toolNumber":-1},{"coords":[0,0,238.806],"extruderPos":0,"fanPwm":0,"feedRate":50,"ioBits":0,"laserPwm":null,"spindleSpeeds":[],"toolNumber":-1},{"coords":[0,0,0],"extruderPos":0,"fanPwm":0,"feedRate":50,"ioBits":0,"laserPwm":null,"spindleSpeeds":[],"toolNumber":-1},{"coords":[0,0,0],"extruderPos":0,"fanPwm":0,"feedRate":50,"ioBits":0,"laserPwm":null,"spindleSpeeds":[],"toolNumber":-1},{"coords":[0,0,0],"extruderPos":0,"fanPwm":0,"feedRate":* Connection #0 to host localhost left intact 50,"ioBits":0,"laserPwm":null,"spindleSpeeds":[],"toolNumber":-1}],"status":"idle","thisInput":null,"time":"2022-07-20T15:44:46","upTime":4052689},"tools":[{"active":[0],"axes":[[0],[1]],"extruders":[0],"fans":[0],"feedForward":[0],"filamentExtruder":0,"heaters":[1],"isRetracted":false,"mix":[1],"name":"Hotend","number":0,"offsets":[0,0,0],"offsetsProbed":0,"retraction":{"extraRestart":0,"length":0.9,"speed":45,"unretractSpeed":45,"zHop":0.1},"spindle":-1,"spindleRpm":0,"standby":[0],"state":"active"}],"userSessions":[{"accessLevel":"readWrite","id":33,"origin":"94.105.126.101","originId":-1,"sessionType":"http"}],"volumes":[{"capacity":236242378752,"freeSpace":220662013952,"mounted":true,"name":null,"openFiles":null,"partitionSize":236242378752,"path":"/","speed":null}]}
However launching the updated executable I get continous json errors:
(I am running rrf 3.4.1 fyi)./reprap_notify_linux_arm64 2022/07/20 15:48:57 Detecting API version... 2022/07/20 15:48:57 Detected firmware revision 2 2022/07/20 15:48:57 Error parsing JSON: unexpected end of JSON input 2022/07/20 15:48:57 Error parsing JSON: unexpected end of JSON input
-
@nxt-1 Interesting, can you provide me full curl of:
curl -v 'http://localhost:8080/rr_status?type=3' curl -v http://localhost:8080/rr_fileinfo (those two below probably will not work) curl -v 'http://localhost:8080/rr_model?key=job' curl -v 'http://localhost:8080/rr_model?key=state'
-
@torin said in notifications upon start/pause/finish of print:
@nxt-1 Interesting, can you provide me full curl of:
curl -v 'http://localhost:8080/rr_status?type=3' curl -v http://localhost:8080/rr_fileinfo (those two below probably will not work) curl -v 'http://localhost:8080/rr_model?key=job' curl -v 'http://localhost:8080/rr_model?key=state'
curl -v 'http://localhost:8080/rr_status?type=3'
-> 404
curl -v http://localhost:8080/rr_fileinfo
-> 404
curl -v 'http://localhost:8080/rr_model?key=job'
-> 404
curl -v 'http://localhost:8080/rr_model?key=state'
-> 404Which makes sense, since Chrishamm mentioned the rr_ system wil be introduced in v3.5