access duet web control trought VPN
-
Hi,
I recently buy a 3d printer with a Duet 3 Mini 5+ built in board and i wonder if is a way to have access the web control through VPN.
Currently the web control only works if you log in from within my network, it cannot be reached from ouside. I have other things such as printers, NAS that works proprly.
Thanks for help.
-
@0__felky__0 ofc, it works well via vpn and it is reasonable secure this way.
-
I think you'd need to configure the netmask using M553 and the gateway using M554.
Add these after your M552:
M553 P255.255.255.0 M554 P192.168.1.1 ;(if that's your router address. Commonly also 1.254) -
@lo-fi my printer has a static up assigned.
I just connect to my vpn and put the local ip of my printer in the browser no additional configurations necessary. -
@cabalsoul Yeah, sometimes it will, just not in every circumstance and will also depend on the VPN type, configuration and router. Seemed a good place to start. Having said that, I'm assuming there that OP is using their router as VPN endpoint, not some other device on their network!
-
@lo-fi Hi, thank you so much for your help.
@lo-fi said in access duet web control trought VPN:
OP is using their router as VPN endpoint
This is correct, i will try and let you know.
-
@lo-fi my vpn endpoint is my synology NAS maybe that’s why it just works
