PINDA leveling sensor
-
@frankv the SuperPINDA and the VINDA are the same OEM part (-:
-
@oliof You got the pindaV2 and superPinda. In China they sell the V2 and you can get confused. If you order the pinda from Prusa you get the superPinda correct.
-
@frankv Vonwange is not a random Chinese shop and I am not talking about the v2. Stop claiming nonsense about what I said.
-
@oliof I was speaking in general not in relation to your remark VINDA. So I didn't try to correct you. I was just mention my recent experience with Pinda V2. Have a great day.
-
@frankv Alright, sorry for the misunderstanding -- have a good one (-:
-
Thanks to everybody. I've ordered the VINDA!
Thanks!
-
@oliof said in PINDA leveling sensor:
I've bought it but now I don't understand a thing..the VINDA works with 5V but the Duet2WiFi seems to have only 3,3V for the sensor....do I need a stepup?
-
@thedragonlord You just wire 5V from let's say EXP on duet board. And wire GND and signal to the end stop or probe conectors on duet
-
@martin7404 said in PINDA leveling sensor:
@thedragonlord You just wire 5V from let's say EXP on duet board. And wire GND and signal to the end stop or probe conectors on duet
stupid me, it's obvious....thanks!
-
@thedragonlord If you're not using the paneldue, the paneldue header is right next to the probe header and offers 5V:
-
Speaking of SuperPinda and Vinda. This is an alternative. Check the data sheet
-
@oliof said in PINDA leveling sensor:
@thedragonlord If you're not using the paneldue, the paneldue header is right next to the probe header and offers 5V:
I use panel due
-
@gixxerfast said in PINDA leveling sensor:
Speaking of SuperPinda and Vinda. This is an alternative. Check the data sheet
Are the dimensions the same than the Vinda's?
-
@thedragonlord The Caribou seems shorter. I have a Vinda here somewhere. I'll measure it. Un momento ...
Nope, they are the same lenghth 35 mm. Same manufacturer Pepperl+Fuchs-Gruppe
-
@gixxerfast said in PINDA leveling sensor:
@thedragonlord The Caribou seems shorter. I have a Vinda here somewhere. I'll measure it. Un momento ...
excellent thanks I just need the lenght of the "cylinder"
-
@thedragonlord See above. Same length 35 mm
-
@gixxerfast Also I may warn that some report that they don't work reliably when enclosed in about 50C ambient near bed and hotend (Voron) but that's maybe a special use case IDK
-
-
@gixxerfast said in PINDA leveling sensor:
@gixxerfast Also I may warn that some report that they don't work reliably when enclosed in about 50C ambient near bed and hotend (Voron) but that's maybe a special use case IDK
uh... I'm designing the support to be as close as possibile to the Volcano heatblock... could be an issue? The printer isn't boxed and I usually print PETG so 240 nozzle and 75 the bed...
-
@thedragonlord said in PINDA leveling sensor:
Volcano heatblock... could be an issue?
Let's see if we can ping one opinion at least @oc_geek What's your thought of the Vinda close to the hotend, OK?