Fan stopped during M303, doesn't restart
-
forgot to add that the fan doesn't respond with the override in machine control.
-
Did it pop at the effector or at the Duet board?
-
Has to be at the main board, none of the fans are working on any port
-
ok, always on fans work, and fan 0 works, fan 1 does not and fan 2 I can't seem to test even though I enabled in the config there is no slider for it in the DWC
-
In settings you can find a place to allow fan 2 slider to show.
-
where at, I have all three listed in there
-
If you tried all three, then that is it.
-
found it, Doh!
-
all fans terminal work except for F1. I'm leery of just putting it on a different one until I know why it happened to start with. need to track this down.
-
Does it look like it blew the mofset on the duet?
-
-
Yeah thats it, I think I found a replacement but small electrics aren't my thing.
https://www.digikey.com/product-detail/en/nexperia-usa-inc/PMV40UN2R/1727-1900-1-ND/5056345
