Solved SD card not detected by Paneldue, until I detect via DWC
-
hey
running latest versions of beta 3.4
latest version paneldue and latest DWCWhen I plug in the SD into the Paneldue, I have to detect it first via the DWC by pressing SD card #1
If i dont do that it never shows up on the SD card list on panel due. -
Hey @jbergene to access a second sd card you need to open the files dialog and press on top left the 'Files on card X' button.
Did you do that?
-
This post is deleted! -
@jbergene thanks for reporting this issue.
I created an issue at github. Any further progress will be done there.
-
Will be part of next release.
-
I registered the M21 P1 config.g in the initial lines and the card slot started working. A little crooked solution but working. Condition - the card must be in the slot. Or, after installing the card, reset the controller.
-
@mfs12 thank you