Possible humidity sensor....
-
Hi,
After the last problems that I have had with very wet filament ...
it occurs to me that if something could not be implemented in the Duet boards, with the same idea of the filament sensor, but being a humidity sensor ...
I don't know If it would be possible, but perhaps it could work that the filament "passed", before the hotend or the extruder, through this filament sensor, and measured the humidity of the filament, warning, or even, stopping the printing ...
-
@peirof I think, it will not be easy to measure the humidity of the filament!?
Perhaps with the conductivity? -
@peirof For info, in English "Humidity" is the amount of water vapour in the air. So one can measure the moisture content of air (which is humidity), or one could measure the moisture content of the filament, but one cannot measure the humidity of the filament because there is no such thing. I know that English is not your native language so I'm not being critical - just trying to help.
-
@deckingman Thanks for clarification.
i should learn english...
