DWC: Button Step Adjustment is not Saved after Restart?

[jay_s_uk]

@neueklasse that's normal.

[NeueKlasse]

@jay_s_uk do you know/ or do someone know how that could be changed? for example i have a
Z Axis with 50, 25, 1, 0,1 and a U Axis with 100, 50, 5, 0,5
that Values are also saved somewhere?

[jay_s_uk]

@neueklasse oh, those ones
they should get written automatically to dwc-settings.json in the system folder

[Phaedrux]

What DWC version are you using?

[NeueKlasse]

@phaedrux the Last Update, 3.4.0

[NeueKlasse]

@jay_s_uk i tried to adjust these Settings (dwc-settings.json, dwc2-settings.json)
after Restart nothing changed, but the Adjustments i took in that 2 files are still ok...
i'm confused a little bit...

[jay_s_uk]

@neueklasse you could just delete them and let DWC recreate them and see if that sorts it out

[NeueKlasse]

@jay_s_uk after Deleting these 2 Files, Configuring the "new Step Values"
and Restarting the Board, everything is the same... the Step Values doesn't Change.

Interesting is:

• in DWC the U and W Values are 50, 25, 1, 0,1 (sorry the Post from 6.9.21 (19:26) was wrong.
  (Z Axis Starts at 25...))
• and on the Paneldue the U and W Values start at 100.. (that's the default value in the json files)

[jay_s_uk]

@neueklasse maybe @chrishamm can comment

[Phaedrux]

@neueklasse said in DWC: Button Step Adjustment is not Saved after Restart?:

@phaedrux the Last Update, 3.4.0

beta3? SBC mode or standalone?

[NeueKlasse]

@phaedrux standalone mode, beta3, correct.