Password protection

jnsanders1983

I was wondering if password protection exist or can be added to the firmware. When I mean protection. Requiring the user to enter a password in order to start or stop a print and before making any changes to its configuration or connecting it to a network. The printer I am building at work requires some way of making sure no one can tamper with it.

SIam

You can see here :

https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M551_Set_Password

fcwilt

@jnsanders1983

You would also have to secure access to the SD card.

Frederick

jnsanders1983

@siam yeah I am not talking about the wifi SSID and password. I am talking about more of how when you log into Linux and you have to provide a user and password. The idea is to keep unauthorized people from using the 3D printer.

SIam

@jnsanders1983 The password for Wi-Fi will be set with M587 with M551 you will set a password for the web interface. Set a username is at the moment not supported by RRF.