[3.4.0.b2] Issue with diagnostic (M122) information

[SIam]

Hello,

I wanted show today the Diagnostic data from my Duet2wifi board, but this was first not successful as you can see on the following picture

To solve this issue, I have restarted the duet board with no success, then I closed the browser and started it again with no success too.
Now I have opened a second Browser (the first browser was still open) here I entered the M122 command and there was no response in this Browser but in the first Browser i got the diagnostic data.
So if I want a result from the M122 command, i have to open two browsers, the first instance is for the result and the second one is to enter the command.

The following sw is installed:
Duet Web Control 3.4.0-b2
Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0beta2 (2021-08-03)
Duet WiFi Server Version: 1.26

greetings
Andy

[sebkritikel]

@siam Some other comments on this issue here: https://forum.duet3d.com/topic/24487/diagnostics-missing?_=1628456075700

No real solution yet , aside from having separate sessions, like you mentioned.

[Phaedrux]

Thanks for beta testing!

[SIam]

@sebkritikel said in [3.4.0.b2] Issue with diagnostic (M122) information:

@siam Some other comments on this issue here: https://forum.duet3d.com/topic/24487/diagnostics-missing?_=1628456075700

No real solution yet , aside from having separate sessions, like you mentioned.

Thanks for pointing me to this thread ! I have overseen this