Bad SD reader Duet 3 Mini 5+
-
I think I have a bad SD reader on my Mini 5+. The board randomly reports no sd card found in the middle of prints, or and startup. Has been happening with increasing regularity. It's gotten to the point where it won't detect the card 4 out of 5 times on startup and can barely make it a few minutes before if it is able to detect it on startup.
I'm wondering if there is anything else that might be causing this or if I should get the board replaced.
I have already tried using a different sd card, but this resulted in the same problem. I have also tried both SD cards on a different Duet 3 Mini and they work fine there.
-
When and where did you purchase your product?
Please send an email to warranty@duet3d.com and CC your reseller. Include a link to this forum thread and the details of your original purchase. You'll receive a reply with a form to fill out.
Sorry for the inconvenience.
-
@phaedrux Will do, thanks!