BtnCmd-DWC Plugin - Customise DWC - v01.03.05 20-09-24

cosmowave

@mintytrebor Thanks for answering.
When i remember me correctly, i have disabled the "Enable Selections in Setting". Because i had problems with the corresponding scrollable selection window. It was not scrollable with the mouse.

In layout mode, i think, the "button types" looks like in your picture. But i'm not 100% sure...

I will check it on my machine today evening.

MintyTrebor

@cosmowave If your memory is correct then I am afraid you are suffering from the known issue in the Release Notes. The fix is posted here (see the last post).

Its a local level issue with the installation of DWC, and the only solution we found was to essentially delete the whole www/dwc folder and re-install. We theorised its left over files/old versions of framework files from previous firmware/DWC upgrades. Its not a BtnCmd issue.

This actually makes some sense given you have had issues installing the plugin.

Can I also suggest you take some backups of your config files/macros etc, just for safety - these kind of local level installation issues make me nervous about the integrity of the sd card.

cosmowave

@mintytrebor Ok. Thanks for the clarification. I will try to delete/re-install the files.
Normally i make backups from time to time...

cosmowave

@mintytrebor You have written, that i have to delete the www/dwc folder.
You mean, that i have to take out my sd-card and delete the folder?

How do i write the new www folder on the sd-card? Normally , until now, i have used the zip files with system upload...

Sorry for the late reply, and sorry for this eventually "idiot-question"!

jay_s_uk

@cosmowave yes, take out the SD card and delete the www folder.
extract the contents of DuetWebControl-SD into a new www folder

cosmowave

@jay_s_uk Where can i find the "DuetWebControl-SD" File?
I only found "DuetWebControl-master.zip"

Again, sorry for that question! I'm a little bit desorientated in github. because i don't use it often...

jay_s_uk

@cosmowave https://github.com/Duet3D/DuetWebControl/releases/download/v3.3.0/DuetWebControl-SD.zip

cosmowave

@jay_s_uk Thank you very much for the link!

cosmowave

@mintytrebor I have deleted the www folder and then re-installed the dwc package.
Then i was able to install the latest BtnCmd Version. But the problem with the info text behind the panels remains.
For me, that is not a big problem. I will erase the info text of the buttons, because i do not really need them.
Thanks for your help and time...

jay_s_uk

@cosmowave very strange.
Can you also try removing dwc-settings.json?
it'll get recreated at boot

cosmowave

@jay_s_uk Deleting dwc-settings.json had also no effect. The hover-texts, and sometimes the blue edit buttons, are still behind the panels.
I have deleted my hover texts. For me it's ok, when we close this problem...

cosmowave

Is it possible to move tabs in layout or custom panel mode?

MintyTrebor

@cosmowave Use the clone tab feature - clone each tab in the order you want them to appear then delete the originals once you are happy.

I would take a backup first though

Edit: Be careful with this approach if you use it to re-order custom panels, it creates a new custom panel ID, which is used to embed them in normal layout tabs.

Now I'm wondering if I added any checks to prevent a custom panel deletion if it is use in a layout.. One to put on my list I think.

MintyTrebor

I have updated BtnCmd for version DWC 3.4 b2 which can be found with the existing release for DWC 3.3.

chimaeragh

@MintyTrebor Is there an option to save and export plugin configuration so that custom layouts can be deployed on multiple machines

MintyTrebor

@chimaeragh
https://github.com/MintyTrebor/BtnCmd/wiki/Backup-&-Restore

It gives you an option to name the backup file, you can then download/upload from the system folder through the existing DWC file browser interface.

chimaeragh

@mintytrebor Thanks

chimaeragh

I have used this plugin to create a simplified dashboard to control my CNC on a mobile phone as the default dashboard is too cluttered for me.

I would like to add movement buttons to another tab that I can set move distances like this
1608322472020-1ea7dda0-3e5a-4a8f-8312-2c4501319a3e-image.png

Any idea how this can be achieved?

MintyTrebor

@chimaeragh Possibly.... by using variables:

(https://duet3d.dozuki.com/Wiki/GCode_Meta_Commands#Section_Variables)

Define A global variable
Create a set of buttons that change the value of the global variable to a fixed value (0.01, 0.05 etc)
Add an object model panel to display the current value of the global variable (https://github.com/MintyTrebor/BtnCmd/wiki/Object-Model-Value-Panel)
Create a macro for each access movement (X+, Y- etc) using the global variable for the distance parameter.
Create macro buttons for each axis movement macro. (X+, X- etc)

chimaeragh

@mintytrebor Thanks