What I2C Expander is used On the Duex?
-
Judging from the previous discussion I had with @dc42 about adding fans and heaters to the expansion board I am developing, he implied that the exact I2C expander used would not force a firmware change. However since I do not want to mess with any firmware, I want to use the same exact parts and in the same config as used on the Duex where possible. My needs require it to be different in some areas. Thus, I am drawing heavily from opensource kicad model of the Duex 0.9a which is the latest duex open source documentation has been released on.
Unfortunately when I exported the BOM on the Duex, 5 kicad puked the below out, and I cannot find any pictures of the Duex detailed enough to read the chip:
䤢≤∻敄楳湧瑡牯㬢倢捡慫敧㬢儢慵瑮瑩≹∻敄楳湧瑡潩≮∻畓灰楬牥愠摮爠晥㬢㬱唢∸∻塓㔱㤰≂ㄻ∻塓㔱㤰≂㬻഻㈊∻㙃∱∻彃㘰㌰㬢㬱〢ふ‱㔳≖㬻഻㌊∻ㅍⰱㅍ䴬ⰲ㍍䴬ⰹㅍ∰∻楆畤楣污ㅟ浭䑟慩㉟㔮洴彭畏整彲潃灰牥潔≰㘻∻䥆≄㬻഻㐊∻㙕唬ⰵㅕ唬ⰲ㍕㬢吢䍍㘲〶㬢㬵吢䍍㘲〶㬢㬻㬵䨢∹∻䥐彎剁䅒彙破∱ㄻ∻㑅䴠呏㬢㬻㬶䨢㐲㬢倢义䅟剒奁㉟ㅘ㬢㬱䔢‴䕔偍㬢㬻㬷䨢㔲㬢倢义䅟剒奁㉟ㅘ㬢㬱䘢乁䰯䑅㔠㬢㬻㬸䨢㤲㬢倢义䅟剒奁㉟ㅘ㬢㬱䔢‶䕔偍㬢㬻㬹䨢ㄳ㬢倢义䅟剒奁㉟ㅘ㬢㬱䘢乁䰯䑅㜠㬢㬻〱∻剔ⰷ剔ⰹ剔ⰶ剔ⰸ剔〱听ㅒ∱∻体ⵔ㌲㬢㬶倢噍〴乕∲㬻഻ㄊ㬱唢〱唬∹∻協体ⵐ㐱㬢㬲㜢䠴呃㈰㬢㬻㈱∻㥃䌬㤲䌬ⰳ㙃䌬㈳㬢䌢た〶∳㔻∻田‱㔠嘰㬢㬻㌱∻ㅃⰱ㍃ⰴ㕃ⰰ㕃ⰱ㕃ⰲㅃⰰㅃⰲ㍃ⰳ㙃ⰴ㕃∳∻彃㘰㌰㬢〱∻田∱㬻഻ㄊ㬴䌢㌱䌬㐱䌬㔱䌬㔳䌬㘳㬢䌢た〶∳㔻∻田㜴㬢㬻㔱∻ㅃⰸㅃⰹ㉃ⰰ㉃ⰱ㍃ⰹ㑃ⰰ㑃ⰱ㑃ⰲ㉃ⰲ㉃∳∻彃㘰㌰㬢〱∻田堠刷ㄠ┰㔠嘰㬢㬻㘱∻㉃ⰷ㍃ⰰㅃ䌬ⰴ㝃㬢䌢た〶∳㔻∻由㔠嘰㬢㬻㜱∻㍄㬢䐢た〶∳ㄻ∻㑅瑳≰㬻഻ㄊ㬸䐢∴∻彄㘰㌰㬢㬱䔢猵灴㬢㬻㤱∻㥄㬢䐢た〶∳ㄻ∻㑅䠠慥≴㬻഻㈊㬰䐢〱㬢䐢た〶∳ㄻ∻㕅䠠慥≴㬻഻㈊㬱䐢ㄱ㬢䐢た〶∳ㄻ∻㉅䠠慥≴㬻഻㈊㬲刢ⰱ㉒刬㔱刬ㄲ刬㠴刬㤴刬〵刬ㄵ刬㈵刬㌵刬㘶刬㐱刬㜴刬ⰳ㝒∲∻归㘰㌰㬢㔱∻䬱㬢㬻㌲∻㙒刬ⰷㅒⰱㅒⰲㅒⰳ㉒ⰳ㉒ⰴ㉒ⰷ㉒ⰸ㍒ⰱ㕒㬢刢た〶∳ㄻ㬱㈢刲㬢㬻㐲∻㍒ⰶ㍒ⰲ㍒ⰳ㍒ⰴ㍒∵∻归㘰㌰㬢㬵㐢㝋㬢㬻㔲∻㍒ⰷ㍒ⰸ㍒ⰹ㑒ⰰ㑒∱∻归㘰㌰㬢㬵ㄢ〸≒㬻഻㈊㬶刢㈴刬㌴刬㐵刬㔵刬㘵刬㜵刬㠵刬㤵刬㐴刬㔴刬㜶㬢刢た〶∳ㄻ㬱ㄢ䬰㬢㬻㜲∻㙒ⰱ㙒ⰲ㙒ⰳ㙒ⰴ㙒∵∻归㘰㌰㬢㬵㐢㝋〠ㄮ∥㬻഻㈊㬸䌢ⰲ㕃䌬ⰸ㉃ⰸ㍃ⰱ㕃ⰶㅃ∶∻彃䱅䍅㙟㌮㝸㜮㬢㬷ㄢ⁵㔳≖㬻഻㈊㬹䐢∱∻彄㘰㌰㬢㬱䔢猲灴㬢㬻〳∻㉄㬢䐢た〶∳ㄻ∻㍅瑳≰㬻഻㌊㬱䐢∵∻彄㘰㌰㬢㬱䔢猶灴㬢㬻㈳∻㡄㬢䐢た〶∳ㄻ∻㍅䠠慥≴㬻഻㌊㬳䐢㌱㬢䐢た〶∳ㄻ∻㙅䠠慥≴㬻഻㌊㬴䨢∲∻䕔䵒㉟圭奁㙟㌮洵≭ㄻ∻䥖≎㬻഻㌊㬵䨢∳∻䥐彎剁䅒彙破∱ㄻ∻㉅䴠呏㬢㬻㘳∻㕊㬢倢义䅟剒奁㑟ㅸ㬢㬱䔢″位≔㬻഻㌊㬷䨢㈱㬢倢义䅟剒奁㑟ㅸ㬢㬱䔢‵位≔㬻഻㌊㬸䨢㐱㬢倢义䅟剒奁㑟ㅸ㬢㬱䔢‶位≔㬻഻㌊㬹䨢㘱㬢倢义䅟剒奁㉟堵∲ㄻ∻义啐≔㬻഻㐊㬰䨢㤱㬢倢义䅟剒奁㉟ㅘ㬢㬱䔢′䕔偍㬢㬻ㄴ∻㉊∰∻䥐彎剁䅒彙堲∱ㄻ∻䅆⽎䕌⁄∳㬻഻㐊㬲䨢ㄲ㬢倢义䅟剒奁㉟ㅘ㬢㬱䔢″䕔偍㬢㬻㌴∻㉊∳∻䥐彎剁䅒彙堲∱ㄻ∻䅆⽎䕌⁄∴㬻഻㐊㬴䨢㜲㬢倢义䅟剒奁㉟ㅘ㬢㬱䔢‵䕔偍㬢㬻㔴∻㉊∸∻䥐彎剁䅒彙堲∱ㄻ∻䅆⽎䕌⁄∶㬻഻㐊㬶䨢㌳㬢䴢塁呟䵅彐䉄㬢㬱匢䥐∰㬻഻㐊㬷刢ⰸ㥒刬〱刬㘱刬㜱刬㠱刬㔲刬㘲刬㤲刬〳㬢刢ㅟ〲∶ㄻ㬰〢げㄵ㬢㬻㠴∻㙊㬢倢义䅟剒奁㉟ㅘ㬢㬱㔢彖啁彘义㬢㬻㤴∻ㅊ㬢䌢乏彎砳∱ㄻ∻㉅灴㬢㬻〵∻㑊㬢䌢乏彎砳∱ㄻ∻㍅灴㬢㬻ㄵ∻㝊㬢䌢乏彎砳∱ㄻ∻㑅灴㬢㬻㈵∻㡊㬢䌢乏彎砳∱ㄻ∻㕅灴㬢㬻㌵∻ㅊ∰∻佃乎㍟ㅸ㬢㬱䔢琶≰㬻഻㔊㬴䨢ㅐ㬢䌢乏彎砳∱ㄻ∻嘵䄠塕匠汥捥≴㬻഻㔊㬵䨢㌱㬢倢湩䡟慥敤彲瑓慲杩瑨ㅟㅸ∰ㄻ∻佃乎た報〱㬢㬻㘵∻㕃∴∻彃㘰㌰㬢㬱㈢渲≆㬻഻㔊㬷䌢㔵䌬㠵㬢䌢ㅟ〲∶㈻∻〱⁵㔳≖㬻഻㔊㬸䌢㤵䌬〶䌬㌶㬢䌢た〸∵㌻∻〱⁵㔳≖㬻഻㔊㬹䨢〴㬢倢湩䡟慥敤彲瑓慲杩瑨㉟へ∳ㄻ∻佃乎た堲㌰㬢㬻〶∻偊∲∻啊偍剅㬢㬱ㄢ嘲䕟≎㬻഻㘊㬱䰢∱∻彃㈱〱㬢㬱ㄢ䡵㬢㬻㈶∻㉌㬢䰢㙟㙸㬢㬱ㄢ田≈㬻഻㘊㬳刢㘴㬢刢た〶∳ㄻ∻〲䬰㬢㬻㐶∻㙒∸∻归㘰㌰㬢㬱ㄢ⸰䬵ㄠ∥㬻഻㘊㬵刢ㄷ㬢刢た〶∳ㄻ∻㔷到ㄠ∥㬻഻㘊㬶唢ㄱ㬢儢乆㘱㐭㑸㬢㬱䄢㐴㌰㬢㬻㜶∻剔ⰵ剔ⰴ剔ⰳ剔ⰲ剔∱∻ⵄ䅐≋㔻∻偉い㘳ぎ䰴㬢㬻㠶∻偊∳∻佃乎㍟ㅸ㬢㬱䔢摮瑳灯嘠汯慴敧匠汥捥≴㬻഻㘊㬹唢㈱㬢吢卓偏ㄭ∴ㄻ∻㐷䍈㈳㬢㬻〷∻㍊∹∻䥐彎剁䅒彙堳∱ㄻ∻㙅卟佔≐㬻഻㜊㬱䨢㠳㬢倢义䅟剒奁㍟ㅘ㬢㬱䔢張呓偏㬢㬻㈷∻㍊∷∻䥐彎剁䅒彙堳∱ㄻ∻㑅卟佔≐㬻഻㜊㬳䨢㘳㬢倢义䅟剒奁㍟ㅘ㬢㬱䔢弳呓偏㬢㬻㐷∻㍊∰∻䥐彎剁䅒彙堳∱ㄻ∻坐彍∳㬻഻㜊㬵䨢㘲㬢倢义䅟剒奁㍟ㅘ㬢㬱倢䵗㉟㬢㬻㘷∻㉊∲∻䥐彎剁䅒彙堳∱ㄻ∻坐彍∱㬻഻㜊㬷䨢㔳㬢倢义䅟剒奁㍟ㅘ㬢㬱䔢弲呓偏㬢㬻㠷∻㍊∲∻䥐彎剁䅒彙堳∱ㄻ∻坐彍∴㬻഻㜊㬹䨢㐳㬢倢义䅟剒奁㍟ㅘ㬢㬱倢䵗㕟㬢㬻〸∻㑒刬㤱刬〲刬㌷㬢刢た〶∳㐻∻到㬢㬻ㄸ∻ㅊ∱∻敔浲湩污求捯彫桐潥楮彸呐㌭㔮浭ㅟ瀰汯㬢㬱䌢乏彎ㅘ∰㬻഻㠊㬲刢㈲㬢刢た〶∳ㄻ∻䬳∳㬻഻㠊㬳䨢㔱㬢倢义䅟剒奁㉟ㅘ㬢㬱䘢乁䰯䑅㠠㬢㬻㐸∻ㅄⰲㅄⰴㅄⰵㅄⰶㅄⰷㅄ∸∻佄㈭㤱䉁㬢㬶䐢ⵏㄲ䄹≂㬻഻㠊㬵䴢ⰵ㝍䴬ⰴ㙍㬢䘢硩湩彧㑍㬢㬴䴢問呎义≇㬻഻㠊㬶刢〶㬢刢た〶∳ㄻ∻到䐠偎㬢㬻㜸∻ㅊ∷∻䥐彎剁䅒彙堲∱ㄻ∻㈱≖㬻഻㠊㬸䌢㜱㬢䌢た〶∳ㄻ∻田‱㔳≖㬻഻㠊㬹䌢㈶㬢䌢䕟䕌彃⸶砳⸷∷ㄻ∻〱田㈠嘵㬢㬻〹∻㙄䐬∷∻彄体ⵄ㈱䘳㬢㬲䐢㉂㑗㌰≌㬻഻㤊㬱䰢∳∻归㠰㔰㬢㬱㈢〲漠浨″≁㬻഻㤊㬲䰢∴∻归㠰㔰㬢㬱䴢䉆㈭〲ⴹㄱ坐∠㬻഻㤊㬳刢㤶刬〷㬢刢た〸∵㈻∻到㔱〠㌮圳㬢㬻㐹∻㝒∴∻归㠰㔰㬢㬱㌢㍒〠㌮圳㬢㬻㔹∻㉃ⰴ㉃ⰵ㉃ⰶ㍃ⰷ㍃ⰸ㕃ⰷ㙃ⰵ㙃ⰶ㙃ⰷ㙃ⰸ㙃ⰹ㝃ⰰ㝃ⰱ㝃ⰲ㝃ⰳ㝃ⰴ㝃ⰵ㝃ⰶ㝃ⰷ㝃∸∻彃㘰㌰㬢〲∻渱㸠〵≖㬻഻㤊㬶䘢∱∻䍍元ㄭ㈲洭湩扩慬敤畦敳潨摬牥㬢㬱嘢义䘠单≅㬻഻㤊㬷䌢㜴䌬㤴㬢䌢ㅟ〲∶㈻∻〱⁵㔳≖㬻഻㤊㬸吢㍐㬢吢彐楶≡ㄻ∻佃乎た報㬢㬻㤹∻㡍㬢䰢䝏ㅏ㬢㬱䰢䝏⁏畄瑥㬢㬻〱㬰䴢㈱㬢䰢杯彯䕃㕟浭浟物潲≲ㄻ∻䕃㬢㬻
-
@sphyloid thats an interesting kiCAD output you got there!
Have a look here:
https://duet3d.dozuki.com/Wiki/Adding_additional_output_ports
its the SX1509B -
@t3p3tony Thank you so much!
-
@t3p3tony said in What I2C Expander is used On the Duex?:
SX1509B
It was my spreadsheet viewer. For some reason it could not understand the formatting. Might have to buy excel, opening it with notepad shows that everything is there and correct
-
@sphyloid google docs imports those CSVs ok if you want a "free" alternative that's more than a text editor.