xy movement short +/- 20%
-
I have a corexy with duet 2 wifi on rrf 3.2
when I go move 100 mm it moves approx 80 mm
if I move 25 mm it moves 20 what can cause this? -
Incorrect steps per mm? M92
Slipping pulleys from loose grub screw?
Missed steps from binding or too low motor current?
-
wrong tooth count on the pulleys? i.e. a 16 tooth pulley where there should be a 20 tooth pulley? Note that 16/20 = 80%.
-
yea that was it i changed to gates pulleys from 20 to 16 i changetd m92 to 100 instead of 80 and its spoton now