Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    5V Cooling fan on Maestro, 24V Fan for part cooling

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    3
    108
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Blacksheep99undefined
      Blacksheep99
      last edited by

      Hi, I've bought a Noctua fan to be used to cool the extruder. I have a 24v fan for the part cooling. I currently have a 24v fan for the extruder connected to fan 1.

      I believe what I need to do is connect the Noctua to fan 2 and ensure the jumper is on the bottom 2 pins? Adjust my config to match. Just looking for a sanity check. Thanks.

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by Phaedrux

        Yes since the Maestro has 2 separate fan blocks you can set the second to 5v on the jumper.

        5bb65d88-d7c1-4998-b108-084a547e8f4a-image.png

        Z-Bot CoreXY Build | Thingiverse Profile

        Blacksheep99undefined 1 Reply Last reply Reply Quote 1
        • Blacksheep99undefined
          Blacksheep99 @Phaedrux
          last edited by

          @Phaedrux Thanks. Tomorrow’s job then

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA