Duet 2 Wifi no display after FW update to 3.0

fragle

Hello,

i ve updated my Duet 2 Wifi to fw 3.0. Termistor configuration is already changed and is working fine.

But i can not get any picture to my display. Everything worked fine until i install the new firmware.

Maybe anyone has an idea what happend ?

Best regards

Chris

oliof

What display? PanelDue? Or do you mean the Web UI?

gringo

M575 P1 S1 B57600
This must be added in your config.g

fragle

i mean the panel Due, the web ui is working fine
Duet Web Control is 2.0.4
Firmware 3,0 from 2020-01-03b3
Duet Wifi Server Version 1.23

fragle

M575 P1 S1 B57600 is not changing anything in my case

gringo

Have you updated your PanelDue ?

A Former User

@gringo

M575 P1 S1 B57600 is not changing anything in my case

~~should be P0 for the PanelDue serial port~~

fragle

Thx a lot, the solution was to update the firmware of the paneldue and followed by M757 P1 S1 B57600

Phaedrux

Also, don't stop at 3.0, update to 3.1.1 as well. Same for the web interface, 3.1.1. And PanelDue fw 1.24