Manual Bed Leveling Assistant output meanings
-
Hello,
I am new to Duet and Reprap and trying to leverage the Manual Bed Leveling Assistant to help level my bed. When I get presented the output of the assistant it will be similar to the following:
Manual corrections required: 0.00 turn up (0.00mm) 0.34 turn down (0.17mm) 0.31 turn down (0.16mm) 0.46 turn down (0.23mm)
I am curious to verify when the assistant states I should "turn up" a knob does that mean get the bed closer to the nozzle or further away?
Thanks
-
Turn down would mean tighten I think, thus lower the bed. And vice versa.
https://duet3d.dozuki.com/Wiki/Using_the_manual_bed_levelling_assistant
-
@bdelia turn up is bed closer to the nozzle and turn down is move it further away
-
Thanks! That helps and is what I was mostly thinking