Z wobbling help required
-
I'm still searching the rason for my Z wobble problem. Now I just recognized that my leadscrews are moving after a layer change is done.
I'm pulling my hairs out for weeks now (soon there are no left to pull out
). Any hints are very appreciated! -
What type of couplers to you have between the stepper and the leadscrew?
And how does it feel if you decouple the stepper and turn the leadscrew by hand?
-
@Olby said in Z wobbling help required:
What type of couplers to you have between the stepper and the leadscrew?
And how does it feel if you decouple the stepper and turn the leadscrew by hand?
Currently I have installed these couplers.
Without attached stepper they are turning smoothly (at least in my opinion).
-
thats not z wobble.
thats the mesh bed compensation.
-
@Veti said in Z wobbling help required:
thats not z wobble.
thats the mesh bed compensation.
Aaaahhhhh....sure, that makes sense. So I can ignore this. Thanks for "pushing my brain"
