bltouch config

[Petar]

@Kolbi
i does not say anything about the online config tool

[Phaedrux]

Making those selections should create the config files you need.

The text I showed in my other post is what get generated.

[Petar]

@Phaedrux

thanks
is this all that i have to do or do i have to make some changes in the config file ?

[Veti]

@Petar

the generated files (all of them) are enough if you have set the parameters correctly

[Petar]

@Veti

Thanks i still dont understand why there is not a tutorial like with pictures how to for a noob like thanks again everyone

[Kolbi]

@Petar, sorry - I didn't fully digest your question in that it was pertaining strictly to the online config tool. If you get stuck, give a look at pages 18 and up - these were my lessons learned with getting bltouch operating.

Cheers,
Kolbi

[Petar]

@Kolbi

what do you mean by pages 18 and up ?
do you have a link for me ?
thanks

[Kolbi]

@Petar, my first post had a pdf attached.

[Phaedrux]

@Petar said in bltouch config:

@Veti

Thanks i still dont understand why there is not a tutorial like with pictures how to for a noob like thanks again everyone

I also posted a 5 part guide on getting an ender 3 up and running with a maestro on RRF2. It's not exactly the same as the wifi on RRF3 but a lot is applicable.

https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37

At some point you'll have to climb the mountain of learning.

[Petar]

@Kolbi
i missed that thanks

[Petar]

@Phaedrux

Ok will read that thanks

[Kolbi]

@Petar, no worries at all. Hope you get it working!

[Petar]

@Kolbi
Yes I hope so too, I am very curious how much better this is than Marlin and the Chinese cheap ass boards

[A Former User]

Maybe this will help. BL Touch guided install on Duet 2 Hardware.pdf

[sylvaindc]

@Phaedrux Again I learn much from your experience, thanks!

[sylvaindc]

@CaLviNx This is great! thanks!

[Petar]

@CaLviNx
Thanks man i'm learning a lot here