Rotating Magnetic Sensor + Dyze Sentinel
-
Hi, is it possible to connect the Dyze Sentinel to the Rotating Magnetic sensor? Will the logic of the Dyze be correct?
-
That has a 3.3V logic high for present and 0V for absebt, where as the filament monitor expects a NC switch, so the pin connected to ground when filament is present:
so the logic is the opposite from the Dyze.
You can use a simple microswitch in a housing that holds the switch closed when filament is present though.
-
I thought that might be the case, I was hopefully there was a setting to invert the logic. Thanks for confirming though