Ender 5 Plus config.g help
-
I am very new to this. I just upgraded my Duet 2 WiFI to 3.11. Config.g file is for old FW. Anyone can send me a config.g for the Ender 5 Plus? I tried config wizard but its all chinese to me. I am using BLT just as it came with. Duet2 is not installed yet. Im trying to get the config installed to it before I install with the Paneldue 5i. I would appreciate the help if anyone could attach the files I need to get this going. Only mod I installed so far is a Micro Swiss Direct Drive Extruder. The printer came with a Meanwell 500-24
-
Post your old config.g so we can see what your settings were before.
-
I never had it working. Its a new install. Just received the board today. Not a clone
-
Check this out from user @mitch
https://www.randoprojects.com/2020/07/26/ender-5-mainboard-upgrade/
-
I have a 5 Plus which comes with the BLT. I dont have a cam. I am just looking for a stock config.g file that someone is using on a stock 5 plus. Only mod I did was the Micro Swiss Extruder. I need all the values already pre-set in the config file and whatver other files I need. I dont know why there isnt a repo for these files to use with stock printers out of the box. I already printed out the mount for the D2 to fit in the stock enclosure. Im going to print an enclosure for the PD 5i next. The printing is a little off as of now but usable with stock board.
-
The changes for the BLtouch are pretty trivial. You can either try it and see what works or doesn't, or sit and wait for someone to come along and maybe have exactly what you want. Even so, you'll likely need to modify it for your printer.
There is a repo of shared configs, but it's up to people to share them. It's also unlikely for any two printers to be exactly the same. They are more for examples.
https://github.com/Duet3D/RRF-machine-config-files
It's really not that hard to configure once you try.
-
I just went thru the tool and its extremely confusing for me and Im in IT LOL. I/O mapping, motor values, Z probe. Heaters, general, and network I got. Other stuff is confusing me,
-
Im gunna do some digging online for a stock e5+ printer.
-
Here's a 5 part guide that goes through the setup of an Ender 3, including going through the configurator.
https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37
The ender 3 and ender 5 are actually quite similar. With what you know about the ender 5 you should be able to make some adjustments to suit.
-
This post is deleted!
