BLTouch/Maestro/RRF3 - Endstop not triggered

vcaldas

Hi all,

I tried to find the answer for that but failed, so, sorry about the duplicated post.

So, I am trying to debug this for a while. I have a bltouch with a Duet2 Maestro and all was working until I update to RRF3.

M401 works,
M402 works,
but when I ask to home Z, it does not deploy and regardless the position of the proble, it is always Not triggered (Web interface/MachineSpecific/Endtops).

Here are my files
config (1).g
deployprobe.g
retractprobe.g

Really appreciate all the hep!

Phaedrux

Please post your homeall and homez as well.

Your config looks correct, and deploy and retract work, so it could be that your homeall isn't using a G30 command.

Please go through these steps to see how far you get.

https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe

vcaldas

@Phaedrux
Thanks a lot for the help.
I actually went through that tutorial before.. but, now it just works.
Didn't have to change a line and was few hours on that already,
I have no clue what happened... but happy o/