DWC/firmware mismatch

jumpedwithbothfeet

@bearer Ok so I tried 3.1.1 bin from the unzipped folder and on verify I reported SAMBA fail?

also I've just spotted that on the Pi I have a file reading -
opt/dsf/dwc2

shouldn't this be reading dwc3?

i get this when trying to connect on the Pi via bossa

jumpedwithbothfeet

@bearer have flashed the board again with a fresh unzipped download of 3.1.1 still not connecting DCS log shows this -

Oct 17 18:05:28 duet3 DuetControlServer[2525]: Licensed under the terms of the G
Oct 17 18:05:30 duet3 DuetControlServer[2525]: [info] Settings loaded
Oct 17 18:05:31 duet3 DuetControlServer[2525]: [info] Environment initialized
Oct 17 18:05:31 duet3 DuetControlServer[2525]: [fatal] Could not connect to Duet
Oct 17 18:05:31 duet3 systemd[1]: duetcontrolserver.service: Succeeded.
Oct 17 18:05:36 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=
Oct 17 18:05:36 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart j
Oct 17 18:05:36 duet3 systemd[1]: Stopped Duet Control Server.
Oct 17 18:05:36 duet3 systemd[1]: Started Duet Control Server.
Oct 17 18:05:37 duet3 DuetControlServer[2777]: Duet Control Server v3.1.1
Oct 17 18:05:37 duet3 DuetControlServer[2777]: Written by Christian Hammacher fo
Oct 17 18:05:37 duet3 DuetControlServer[2777]: Licensed under the terms of the G
Oct 17 18:05:38 duet3 DuetControlServer[2777]: [info] Settings loaded
Oct 17 18:05:39 duet3 DuetControlServer[2777]: [info] Environment initialized
Oct 17 18:05:39 duet3 DuetControlServer[2777]: [fatal] Could not connect to Duet
Oct 17 18:05:39 duet3 systemd[1]: duetcontrolserver.service: Succeeded.
Oct 17 18:05:44 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=
Oct 17 18:05:44 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart j
Oct 17 18:05:44 duet3 systemd[1]: Stopped Duet Control Server.
Oct 17 18:05:44 duet3 systemd[1]: Started Duet Control Server.
Oct 17 18:05:45 duet3 DuetControlServer[2796]: Duet Control Server v3.1.1
Oct 17 18:05:45 duet3 DuetControlServer[2796]: Written by Christian Hammacher fo
Oct 17 18:05:45 duet3 DuetControlServer[2796]: Licensed under the terms of the G
lines 742-764/764 (END)
Oct 17 18:05:28 duet3 DuetControlServer[2525]: Licensed under the terms of the GNU Public License Version 3
Oct 17 18:05:30 duet3 DuetControlServer[2525]: [info] Settings loaded
Oct 17 18:05:31 duet3 DuetControlServer[2525]: [info] Environment initialized
Oct 17 18:05:31 duet3 DuetControlServer[2525]: [fatal] Could not connect to Duet (Timeout while waiting for transfer ready 
Oct 17 18:05:31 duet3 systemd[1]: duetcontrolserver.service: Succeeded.
Oct 17 18:05:36 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Oct 17 18:05:36 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 68.
Oct 17 18:05:36 duet3 systemd[1]: Stopped Duet Control Server.
Oct 17 18:05:36 duet3 systemd[1]: Started Duet Control Server.
Oct 17 18:05:37 duet3 DuetControlServer[2777]: Duet Control Server v3.1.1
Oct 17 18:05:37 duet3 DuetControlServer[2777]: Written by Christian Hammacher for Duet3D
Oct 17 18:05:37 duet3 DuetControlServer[2777]: Licensed under the terms of the GNU Public License Version 3
Oct 17 18:05:38 duet3 DuetControlServer[2777]: [info] Settings loaded
Oct 17 18:05:39 duet3 DuetControlServer[2777]: [info] Environment initialized
Oct 17 18:05:39 duet3 DuetControlServer[2777]: [fatal] Could not connect to Duet (Timeout while waiting for transfer ready 
Oct 17 18:05:39 duet3 systemd[1]: duetcontrolserver.service: Succeeded.
Oct 17 18:05:44 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Oct 17 18:05:44 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 69.
Oct 17 18:05:44 duet3 systemd[1]: Stopped Duet Control Server.
Oct 17 18:05:44 duet3 systemd[1]: Started Duet Control Server.
Oct 17 18:05:45 duet3 DuetControlServer[2796]: Duet Control Server v3.1.1
Oct 17 18:05:45 duet3 DuetControlServer[2796]: Written by Christian Hammacher for Duet3D
Oct 17 18:05:45 duet3 DuetControlServer[2796]: Licensed under the terms of the GNU Public License Version 3
~
~
~
~
~
~
~
~
~
~
~
lines 742-764/764 (END)
Oct 17 18:05:28 duet3 DuetControlServer[2525]: Licensed under the terms of the GNU Public License Version 3
Oct 17 18:05:30 duet3 DuetControlServer[2525]: [info] Settings loaded
Oct 17 18:05:31 duet3 DuetControlServer[2525]: [info] Environment initialized
Oct 17 18:05:31 duet3 DuetControlServer[2525]: [fatal] Could not connect to Duet (Timeout while waiting for transfer ready 
Oct 17 18:05:31 duet3 systemd[1]: duetcontrolserver.service: Succeeded.
Oct 17 18:05:36 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Oct 17 18:05:36 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 68.
Oct 17 18:05:36 duet3 systemd[1]: Stopped Duet Control Server.
Oct 17 18:05:36 duet3 systemd[1]: Started Duet Control Server.
Oct 17 18:05:37 duet3 DuetControlServer[2777]: Duet Control Server v3.1.1
Oct 17 18:05:37 duet3 DuetControlServer[2777]: Written by Christian Hammacher for Duet3D
Oct 17 18:05:37 duet3 DuetControlServer[2777]: Licensed under the terms of the GNU Public License Version 3
Oct 17 18:05:38 duet3 DuetControlServer[2777]: [info] Settings loaded
Oct 17 18:05:39 duet3 DuetControlServer[2777]: [info] Environment initialized
Oct 17 18:05:39 duet3 DuetControlServer[2777]: [fatal] Could not connect to Duet (Timeout while waiting for transfer ready 
Oct 17 18:05:39 duet3 systemd[1]: duetcontrolserver.service: Succeeded.
Oct 17 18:05:44 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Oct 17 18:05:44 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 69.
Oct 17 18:05:44 duet3 systemd[1]: Stopped Duet Control Server.
Oct 17 18:05:44 duet3 systemd[1]: Started Duet Control Server.
Oct 17 18:05:45 duet3 DuetControlServer[2796]: Duet Control Server v3.1.1
Oct 17 18:05:45 duet3 DuetControlServer[2796]: Written by Christian Hammacher for Duet3D
Oct 17 18:05:45 duet3 DuetControlServer[2796]: Licensed under the terms of the GNU Public License Version 3
~

A Former User

When connected as usb, what does duet3 board identify as? (Device manager in windows or lsusb on the pi, depending on where usb is connected?)

jumpedwithbothfeet

@bearer on windows it shows as com3 bossa port on the Pi it shows -

pi@duet3:~ $ lsusb
Bus 001 Device 007: ID 04d9:0006 Holtek Semiconductor, Inc. 
Bus 001 Device 005: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 006: ID 0424:7800 Standard Microsystems Corp. 
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@duet3:~ $ lsusb
Bus 001 Device 008: ID 1d50:60ee OpenMoko, Inc. 
Bus 001 Device 007: ID 04d9:0006 Holtek Semiconductor, Inc. 
Bus 001 Device 005: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 006: ID 0424:7800 Standard Microsystems Corp. 
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@duet3:~ $

the first instance of lsusb is disconnected and the second the duet id connected it shows 7 usb ports as im using the raspberry pi keyboard but the duet is connected directly to the board!

Phaedrux

Maybe I missed it, but which version of Pi is it and how is it powered? If possible, try powering the pi directly from the wall if not already.

jumpedwithbothfeet

@Phaedrux the Pi is a Pi 3b+ it is powered via the duet, i can move the jumper and power externally if you think it will make a difference?

Phaedrux

@jumpedwithbothfeet worth a shot.

jumpedwithbothfeet

@Phaedrux @bearer it sort of worked! I have a low power symbol, but it appears I have access to DWC before I mess up the progress should I sudo update or load my config files?

jumpedwithbothfeet

@Phaedrux so i'm back up and running! however i now have the issue of powering the Pi correctly its externally powered now but i still have the lightening bolt in the corner, my duet has a jumper only bridging INT 5v EN is this the correct way to leave it?

jumpedwithbothfeet

@bearer @Phaedrux @Veti before I forget I just want to say thank you for your help, it is very much appreciated especially as it is something I would of never figured out by myself.

Kind regards Jim

A Former User

If it showed up as bossa on windows and openmoko/duet on the pi then it wasn't properly flashed before you effectively reset it when moving the usb cable to the pi I reckon.

Bossa is the bootloader.

Phaedrux

@jumpedwithbothfeet said in DWC/firmware mismatch:

@Phaedrux so i'm back up and running! however i now have the issue of powering the Pi correctly its externally powered now but i still have the lightening bolt in the corner, my duet has a jumper only bridging INT 5v EN is this the correct way to leave it?

I would suggest that you power the duet and the pi separately and not one from the other. So Int 5v jumper position.

https://duet3d.dozuki.com/Wiki/Duet_3_Mainboard_6HC_Hardware_Overview#Section_5V

What other USB peripherals are connected to the Pi?

Am I to understand that you're up and running now other than the lightning bolt?

Originally it was planned to be able to power either direction, but the power draw was spec'ed for a Pi3 with no peripherals, so it can actually end up being easy to overwhelm in practice.

jumpedwithbothfeet

@Phaedrux I only power the keyboard and mouse from the Pi, I used to run a 7inch touch screen via the Pi too but I noticed the duet was sort of glitchy when running it so I stopped using it apart from that the only other usb device is a usb flash drive for file transfer.

thank you for the link I looked on the wiring diagram and the 5v notes but didn’t think to look at the overview! I will power the. Separately from now on, I think the lightening bolt is just my crappy Pi PSU it only has a 2.5amp output, I’ll test that when I hook up a 5 amp buck converter i have and see if it sorts the issue!

@bearer I thought it had loaded correctly write/verify/reset etc, is it still an issue then? Or would the lack of power from the Pi cause bossa on the pi fail to find the board?

A Former User

@jumpedwithbothfeet said in DWC/firmware mismatch:

@bearer I thought it had loaded correctly write/verify/reset etc, is it still an issue then?

if the board identifies as bossa flashing was not a success. (erase jumper left in place or not reset are the common failures)

as long as it identifies as duet (or openmoko on some linux versions) you're ok now

jumpedwithbothfeet

@bearer thank you for the explanation I suspect I may have self induced that a few times these last few days!

@Phaedrux I have just tried my pi on a 5 amp buck converter and powered it up along with the printer, I am still getting the lightening bolt, is it only for the Pi side of the system I.e raspbien/Linux or the duet as well via the ribbon cable if you know what I mean, Unfortunately I don’t have a spare Pi3/4 to swap it out with, I did remove all usb connections and the bolt is still present.

jumpedwithbothfeet

@Phaedrux all sorted it was a cheap usb cable! Thanks again for your help

Phaedrux

I've added some notes to the Duet3 documentation on powering the SBC. When in doubt, power it separately.

https://duet3d.dozuki.com/Wiki/Duet_3_Mainboard_6HC_Hardware_Overview?revisionid=HEAD#Section_Electronics_power_consumption