Bad printing quality for unknown reason
-
can you post a link to the kit?
-
@Veti Its the full BLV MGN Cube kit https://www.aliexpress.com/item/4000216439704.html
-
@Veti I think it printed better but it still has the weird lines artifact. Printing a benchy now.
EDIT: Benchy failed but same story.
-
Hey, I just happen to see you said Cura, just a wild guess on my part. Is your Slicer set to 3mm filament?
-
@Phantom329 said in Bad printing quality for unknown reason:
EDIT: Benchy failed but same story.
maybe they supplied a semitec thermistor. try B4725 C7.06e-8
-
@brotherchris Nope, I have the extruder and material set to 1.75mm.
-
I slowed down the printing speed to 30mm/s and on one side it printed almost the same, smaller blobs. On the other side, though, it printed with minimal blobs and shows pretty clean lines. I'm tempted to blame the feeder... its a knock-off dual drive feeder and I had to rebuild it like 10 times to make it smooth. My friend also said it could be the hotend which is a v6 clone. What do you think?
-
print a temperature tower
-
@Veti Seems like its not a temperature issue
-
Looks over extruded and overheated.
-
@Phantom329 said in Bad printing quality for unknown reason:
Seems like its not a temperature issue
did you just print the tower? it looks the same for all heights.
you need to script the change of temperature
