Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Sequencing issues with Duet3 and Exp boards

    Scheduled Pinned Locked Moved
    Beta Firmware
    2
    2
    91
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • RobMinkundefined
      RobMink
      last edited by

      I am still getting occasional sequencing issues with my Duet3 and exp03 boards. The printer will not wait for the gantry to be in the right position to execute a tool change using the servo. The servo is on the main board and the core xy motors are on exp03 board 1.
      This does not happen all the time, but often enough to mess up a print. DWC 3.1.1, RC11. I am wondering if this issue would go away if I put the core XY motors on the same board as the servo.

      Thanks in advance!

      Phaedruxundefined 1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator @RobMink
        last edited by

        @RobMink said in Sequencing issues with Duet3 and Exp boards:

        RC11

        Are you actually using RC11? Time to update everything to 3.1.1

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA