Print dimension off

peirof

Hi,

I have printed a piece.... a small piece.... but print off of dimension

Dimension of STL, its like a cilinder

X = 51.16 mm
Y = 51.16 mm
Z = 15 mm

Printed dimension

X = 57.2 mm (off of dimension)
Y = 51.6 mm ( Its ok for me)
Z = 15.3 mm (its ok for me)

Layers seems ok.
The overall finish its ok
Slicer Cura 4.6

Printer: Delta with linear rails

Don't seems a mechannical issue.... not sure

Ideas what i have to check?

Sytac072

Hi, I also had this problem with my delta printer and I also was in trouble because of the mismatch of the dimensions of the print.
But, looking around, I found and followed this https://duet3d.dozuki.com/Wiki/Gcode#Section_M579_Scale_Cartesian_axes
Everything now is correct.

peirof

Solved, i have try with another slicer and works OK... suppose.when I have added stl to.Cura, a haves scaled in one axis...

Sorry for disturb

@Sytac072. ... time ago I have try ti use these gcode in my Delta. ... and no works as spected. ..Delta kninematics are particular, and all axes have relationship. ..