Serial connection and opposite spin direction
-
Hi at all,
Sorry for my "poor English"...:-)
I'm looking for some information about the correct serial connection of two stepper motors for axis Y that has to spin in opposite direction controlled by Y driver of duet board.
I found a lot of wiring diagrams in internet, but no one clearly explain to me how obtain the opposite direction.
should I only connect two opposite motors windings (i.e A1 and A2 with B1 and B2)? or should i also to reverse the polarity of windings (i mean A1 with B1 and A2 with B2)?
The first connection that i have done, is not working well....the motors only do a little confused movement without direction.
Thanks for you help.Logriso
-
This is how I have done it in the past with a Duet board.
-
@Coffee Thank a lot...
I will try.... -
Hi.
I've tried and everything worked fine.Thanks again!
-
Good deal! You are most welcome!