plane leveling problems with Z IR probe
-
hi I'm having problems with the duet wifi, all the fans have broken, and now I see problems with the leveling of the printing plate, through the Z IR probe
-
@massimilianoconti Please give us more details. See: https://forum.duet3d.com/topic/5909/guide-for-posting-requests-for-help
Have you checked the fan fuse?
Ian
-
hello thanks for the reply. yes it is ok i think a mosfet is burned
-
I have tried many things from the black sheet under the glass to changes in the height of the probe to various config settings. or the probe is defective otherwise I have no other ideas. in this way you cannot print the nozzle hitting the glass by scratching
-
the printer is Cartesian 300x300x300 extruder e3d vulcano
-
motherboard duet wifi vers. 1.04
Board: Duet WiFi 1.02 or later
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 2.05 (2019-12-13b1)
Duet WiFi Server Version: 1.23
