Black 1.75mm ABS that prints shiny.
-
My stash of Sainsmart black ABS has ran out and no longer available it seems, even straight from them. Except for an old roll of Hatchbox, no other brand I have tried in the last couple years printed with a shiny surface. Anyway, long story short, does anyone have a lead on Black 1.75mm ABS that prints well and leaves a shiny surface?
Thanks -
@Coffee a quick wipe with a paper towel that has a couple drops of acetone on it will instantly shine the surface of ABS.
-
For those who may find it useful, I found that Kodak brand ABS (for the black at least) prints with even more shine than Sainsmart!
-
@Coffee , aren't the layer lines more visible with a shiny filament?
I typically look for matte filaments e.g. from Matteforge, because the surface looks cleaner.
