Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Hi Everyone! I just bought a Duet WiFi to power my DIY corexy

    Scheduled Pinned Locked Moved
    My Duet controlled machine
    2
    3
    199
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Kajundefined
      Kaj
      last edited by Kaj

      Hello Everyone,

      Fresh member, first post 🙂

      Guess I'll do a short intro!

      My 3D adventure began somewhere second half last year where I got myself a CR10 S PRO.
      I quickly started upgrading this machine adding a bltouch, Z braces, Z rods sync, linear X rail, custom direct drive extruder etc. (Link to a video of the direct extruder: Click on me)

      After hitting speed limitations due to the bed moving for the Y and also wanting to print bigger than 300x300
      I stumbled upon CoreXY machines and decided to try and build one.

      I got a frame together, added rails and tested the Z movement yesterday!
      Ztest.gif

      Since I've got good parts (meanwell 24v power supply, hotend etc.) on the CR10 S PRO I'll be taking that one apart for parts.
      I'll also be using its heated bed for now since I want to cut costs for now and think about what kind of bed I want.

      Eventually I'm aiming at 500x500x500 but I'll see how close I can get. (the frame is 3030 60cm on the 4 sides inside)

      The fun part

      I decided to get a Duet WiFi to power my creation since I read good things about it, liked the community and want to support Duet3D. You guys are doing great things!

      I hope my Duet arrives tomorrow and hope to have it hooked up for testing somewhere the next couple of weeks.
      I've read some documentation on configurating it but for a newbie it looks daunting! So I'll probably pop up here and there with questions on how I'm supposed to get it working 😸

      I look forward to being part of this community!

      droftartsundefined 1 Reply Last reply Reply Quote 2
      • droftartsundefined
        droftarts administrators @Kaj
        last edited by

        @Kaj Welcome! You'll find a wealth of enthusiasts, support and almost unlimited (and occasionally conflicting) advice here! I'm also in the early stages of building a CoreXY, in as much as I've built the frame. Going to go with a linear rail HEVO at the top, and the Jubilee kinematic bed and Z arrangement at the bottom. Or at least that's today's plan!

        Ian

        Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

        1 Reply Last reply Reply Quote 2
        • Kajundefined
          Kaj
          last edited by

          Thanks! I'll have to look up what kinematic bed and Z arrangement means!

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA