Stuck on "Updating Firmware" - Duet 2 Maestro
-
Hey,
I ordered a Duet 2 Maestro, attached it to the USB, followed the guide to set up the network and web interface. I wanted to update the Firmware coming from 2.01.I followed the guide on updating it and downloaded a combined package for v3, which the webinterface didn't seem to recognise. I then tried to just update to 2.05, using the "DuetMaestroFirmware.bin" from the last release before v3. The web interface asked me to start the update, which I confirmed.
So now, the Cr10s5 display keeps showing "Updating Firmware" since around 1 hour. I can't believe, that this is a normal amount of time for a 400kb firmware file.
At this point I am unsure. The diag-led is solid red, the web interface is not responding. Did I brick the board?
It would feel wrong to unplug it at this point.
What could I do?
-
Do you have the iap4s.bin in the sys folder?
As far as I know you need this one also for the downgrade -
@MrInka said in Stuck on "Updating Firmware" - Duet 2 Maestro:
"Updating Firmware" since around 1 hour. I can't believe, that this is a normal amount of time for a 400kb firmware file
It should be quite fast, a minute or even less.
Look up the usb programming if you don't get it working.
-