Problem with temperature sensor mark 2000°
-
-
-
when you enter M305 P1 X201 in the console(not the config) does it also show 2000?
-
-
that means it cant talk to the dauthterboard.
did you connect it the correct way round?
-
-
that is the wrong way.
compare the documentation
https://duet3d.dozuki.com/Wiki/Connecting_PT100_temperature_sensorsthe spacer should line up
-
Ok but right now the screen show -0.2°
-
@kyll said in Problem with temperature sensor mark 2000°:
-0.2°
thats the 100 ohm resistor. now switch the channel
-
On it's working thank you so much