Duex5 and Duex2 Pre-order open
-
Done and ordered
-
Would it be possible to solder additional fan headers to the Duex2, as it is the same PCB as the Duex5?
-
It's the same PCB. You can solder additional headers but be aware that we are only populating the components for 2 channels on the Duex2. It's not just the headers we are leaving off.
That said the source will be available including the BOM so depending on what you wanted to add you could do so.
-
Tony
Just had a try at pre-ordering a DUEX5 but am confused over the pricing of it
When I try to select it it shows +82.5 for the x5 but adds this onto what appears to be a base price taking it upto 140 +Vat which is more than a DuetWiFi.
Can you confirm the actual price please.
Doug
-
Tony
Just had a try at pre-ordering a DUEX5 but am confused over the pricing of it
When I try to select it it shows +82.5 for the x5 but adds this onto what appears to be a base price taking it upto 140 +Vat which is more than a DuetWiFi.
Can you confirm the actual price please.
Doug
Seems to work for me. Comes out at £99.99 inc the VAT.
-
-
Tony
Just had a try at pre-ordering a DUEX5 but am confused over the pricing of it
When I try to select it it shows +82.5 for the x5 but adds this onto what appears to be a base price taking it upto 140 +Vat which is more than a DuetWiFi.
Can you confirm the actual price please.
Doug
i observed the same issue earlier today when getting a quote for possible xmas present for my 3d printer. I see now it’s fixed.
-
Apologies, it should be fixed now.
-
i´m totally new to the duet boards,can i use the TMC2660 on the duex5 and duex2 to run additional x,y,z motors or only E motors?
-
i´m totally new to the duet boards,can i use the TMC2660 on the duex5 and duex2 to run additional x,y,z motors or only E motors?
You can use the Duex2/5 to drive any axis you would like
-
Have a look here:
http://reprap.org/wiki/G-code#M584:_Set_drive_mapping
