I cleared filament-change.g, resume.g, and pause.g. but the printer still keeps pausing.

I am trying to pause and change color. the slicer is superslicer.

color change test.gcode

It paused as expected, but after I clicked resume, it automaticlly paused again. I recorded a test here: https://youtu.be/iS4GkH3D5qw

filament-change.g:

M83 ; relative extrusion
G1 E-2 F3600 ; retract 2mm
G91 ; relative motion
G1 Z15 F6000 ; up 15mm
G90 ; absolute motion
G1 X150 Y250 F6000 ; swap spot

resume.g:

G1 R1 X0 Y0 Z5 F6000 ; go to 5mm above position of the last print move
G1 R1 X0 Y0          ; go back to the last print move
M83                  ; relative extruder moves
G1 E10 F3600         ; extrude 10mm of filament

I also tried clear the resume.g, same result.