Best posts made by yannlossouarn

@infiniteloop
As soon as I trigger the bed heater, a reset happened. But in the meantime I made some tests with another power supply. I hadn't already done that, because I know it is not powerful enough, but that's a nice lab power supply, with appropriate protection so I decided to have a try because I happened to have a doubt on my usual one. As expected, it does not work but there is no reset, there is only an undervoltage error in the Duet GUI. So I presume my power supply was damaged when the initial bed heater overheated. The old power supply is a 10Amps, and the protection fuse is 15A, so... I ordered a new power supply, I'll report here. In the meantime, standby, and thanks for your attention.