Yep, the screw went across of three traces, this could have been very bad.
Best posts made by yagodajm
-
RE: Duet Maestro no Ethernet lights and no light on endstop switchesposted in General Discussion
-
RE: Problems with Z axis steppersposted in Duet Hardware and wiring
@zapta
I am just worried with the current on the second one. The maestro Max's out at 1.6, I believe it is to much? -
RE: Multiply issues with new 6HCposted in General Discussion
@jay_s_uk Good evening, Yes, I am using 2.1b6. I am using the one from this repository. https://github.com/Duet3D/WiFiSocketServerRTOS/releases DuetWiFiServer_32S3.bin
Thanks,
Justin -
RE: BIQU Microprobe with 6HC.posted in General Discussion
@yagodajm V2. I got it, I have to invert the pin.
M558 K0 P5 C"^!io4.in" H3 F60 T6000 A10 R1.25 S0.008 B1 ; Set Z probe type/mode 9. H=Dive Height. F=Speed probe speed,Thanks,
Justin