Burn down a piece of drive. It doesn't matter. However, there is a memory protection failure, what is the reason to help me!
code_text
2021/2/4下午3:24:50 M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.2 running on Duet 3 MB6HC v1.01 or later (standalone mode)
Board ID: 08DGM-9561L-D63T4-6J1FA-3S46J-KA0RG
Used output buffers: 3 of 40 (25 max)
=== RTOS ===
Static ram: 149788
Dynamic ram: 92280 of which 404 recycled
Never used RAM 116360, free system stack 204 words
Tasks: NETWORK(ready,193) ETHERNET(blocked,109) HEAT(blocked,362) CanReceiv(blocked,927) CanSender(blocked,371) CanClock(blocked,349) TMC(blocked,65) MAIN(running,1148) IDLE(ready,19)
Owned mutexes:
=== Platform ===
Last reset 00:14:41 ago, cause: power up
Last software reset at 2021-02-04 14:59, reason: MemoryProtectionFault mmarValid daccViol, GCodes spinning, available RAM 116360, slot 1
Software reset code 0x4163 HFSR 0x00000000 CFSR 0x00000082 ICSR 0x00400804 BFAR 0x0000003a SP 0x2041fbb8 Task MAIN Freestk 1660 ok
Stack: 00000000 00000001 00000001 00000000 0000001d 0046ad93 0046b178 610f0000 2042ae18 00000000 2042ae18 0046b0ff 2042ae18 00000000 6ca7badd 0000000a 2042ae18 2042c3ac 00000000 00000001 00000000 0046ad93 2042c3ac 00000000 00000000 0046b0ed 2042c3ac
Error status: 0x00
Aux0 errors 0,0,0
Aux1 errors 0,0,0
MCU temperature: min 28.8, current 31.2, max 31.5
Supply voltage: min 3.9, current 3.9, max 4.0, under voltage events: 0, over voltage events: 0, power good: no
12V rail voltage: min 3.8, current 3.8, max 4.1, under voltage events: 0
Driver 0: position 0, ok, reads 0, writes 0 timeouts 0, SG min/max not available
Driver 1: position 0, ok, reads 0, writes 0 timeouts 0, SG min/max not available
Driver 2: position 0, ok, reads 0, writes 0 timeouts 0, SG min/max not available
Driver 3: position 0, ok, reads 0, writes 0 timeouts 0, SG min/max not available
Driver 4: position 0, ok, reads 0, writes 0 timeouts 0, SG min/max not available
Driver 5: position 0, ok, reads 0, writes 0 timeouts 0, SG min/max not available
Date/time: 2021-02-04 15:24:49
Slowest loop: 1.53ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 25.0MBytes/sec
SD card longest read time 0.7ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 1.26ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- Ethernet -
State: active
Error counts: 0 0 1 0 0
Socket states: 5 2 2 2 2 0 0 0
=== CAN ===
Messages queued 0, send timeouts 4100, received 0, lost 0, longest wait 0ms for reply type 0, free buffers 48)
