Best posts made by Vinculum

Well what the title says basically.

The old DWC showed:

The 2.02 DWC shows:

Can we get it back please?

@hackinistrator
You dir sir are my hero of the day. Turned the bed heater off after the first layer et voila:

So i checked the config with the other printers. It is not completely the same (others are Duet 2 with RRF2) but i missed 1 tiny thing.
This line: M307 H0 B1 S1.00
The B1 had to be a B0...

Problem solved, case closed. I thank you all for your time and input!

I tried the new SD card and that seems for now to do the trick. Thank you for the help. If the issue happens again I will let you know.

Ok the plot thickens. I printed a simple square, no infill, just 3 perimeters @ 150mm/s with 0.15mm layer height.
The only difference is the size, 100x100, 200x200 & 400x400.

Here is the result (forget the writings):

I'm lost...