Thank you Filastruder for the quick turn around. I received my screen yesterday and it works fine.
Best posts made by vhoward
-
RE: Panel due or touch screen problemposted in PanelDue
-
RE: Endstops not working correctlyposted in Firmware installation
@fcwilt Thanks. That worked. The last time I set up a machine from scratch, it was with RRF2. Still not familiar with the new commands.
-
RE: Updated Panel Due v2, now the screen will not come onposted in PanelDue
Problem has been solved. The problem was me. I did not have 3 check boxes checked in Bossa 1.8 that needed to be checked. I went back and re-read the instructions on DC42's blog and fixed my error. My PanelDue is now updated.