Posts made by ventu22

work
thank you all!!!!!

how to connect the switch in the zprobe connector?

I think the code C"zprobe.in+zprobe.mod" is wrong but that's what configurator inserts

thanks for now!
with;

C "! Zprobe.in + zprobe.mod"

the probe collides on the bed

and with;

C "^ Zprobe.in + zprobe.mod"

does not work
the probe is connected in E0 endstop terminal as written in the configurator (if I click the switch the led turns off (e0stp) )

i tried this;

; Z-Probe
M558 P5 C"zprobe.in+zprobe.mod" H5 F120 T6000        ; set Z probe type to switch and the dive height + speeds
G31 P500 X0 Y0 Z16.0                           ; set Z probe trigger value, offset and trigger height
M557 R115 S20                                  ; define mesh grid

the console sends this message; Error: Z probe already triggered at start of probing move

sorry for my english, i try to explain myself.
The automatic procedure does not work, when I try to start the procedure the axes go home and the nozzle is positioned 22mm from the bed, and the manual leveling procedure starts. but in the configurator I set the switch (original anycubic) to probe the bed to do the automatic leveling, I don't understand why it starts manually when everything must work automatically

Hi,
I have a problem with automatic calibration, the automatic procedure does not work, but the manual procedure starts.
I used the online configurator and inserted the switch that I connected to the E0 endstop terminal.
i have an anycubic predator,these are the configuration files
config.g bed.g