@Luke-sLaboratory Thanks
Posts made by vectorinnovations
-
RE: Building an adaptable XL COREXY machine with 2023+ featuresposted in Duet Hardware and wiring
Thanks!
I'm struggling a bit to know all the components I need to order (So I don't have to reorder).
-
Building an adaptable XL COREXY machine with 2023+ featuresposted in Duet Hardware and wiring
I’m planning a XL Build (1250 x 2500 x 1250mm) right now, and I would appreciate some direction.
I’m pursuing Duet3D, because I want a reliable, capable and expandable printer.
Because its so large, I’m going to run larger steppers, so external drivers (at least for the Z-Axis).
- I wish to make this upgradeable, but I plan to start with 3 printer heads and a tool exchanger (up to five in the future). Basically, I want my own Prusa XL, but larger.
- I want to add input shaping and eventually lidar.
- I want a daughter board for each direct drive extruder.
- I wish to add spaghetti sensing as well (I found a source for this).
Because of these requirements, I’m leaning to the 6XD. Can you please help me spec out the remaining components from Duet3D?