Topics created by V3DPrinting

@Phaedrux @engikeneer
I do confirm that the issue was the cooling settings.
The ColorFabb On Demand filament, in that particular color, is prone to create the issue.
Polyterra filament does not create any issue with the constant cooling setting as in S3D

IMG_7413.JPG IMG_7412.JPG

So the only problem now is that you're seeing Error: Bad command: 53 after an emergency stop reset?

@dc42 Is this mesh probing error being fixed in the 2,05 or 3 FW versions ?

@Phaedrux said in Multiple issues with Duet Ethernet since 2 weeks:

@V3DPrinting said in Multiple issues with Duet Ethernet since 2 weeks:

I've discovered that the ground provided by the mains in my building (I'm in a business center) was faulty with a constant 105V - 30 microA AC current....

Curious how you even discovered that.

I've discovered it touching the casing and the central heating tubes, which are grounded else where.

The current is not strong enough (30 micro Amps) to be detected just touching the casing, because the shoe soles's are not conductive or not enough.