@phaedrux have managed to get new ip 192.168.1.156. And got machine working, it seems to be retaining ip so far. The files just sent were taken after achieving 192.168.1.156 ip
Latest posts made by Trev133
-
RE: Not retaining network IP
-
RE: Not retaining network IP
@phaedrux will have a look and get back to you
-
RE: Not retaining network IP
@droftarts Thanks Ian for your help, you have probably worked out I am no expert at this. When I put in M587 as suggested I get response as photo attached. I tried M588 to remove remembered network which doesn’t look right. .14 (there are usually 3 numbers.) Removing it doesn’t work, I am sure I am missing something. When I try setting up new ip using M587 I get OK response but never get the new ip address
-
RE: Not retaining network IP
@phaedrux so I understand, you mean send M587 via Yat software and see what it returns?
-
RE: Not retaining network IP
@phaedrux I have been using M587 via Yat software and as defined in the process you attached, each time a new ip is assigned and I can run machine but this ip is not being retained when I return in a few days time. Will go through the process again tomorrow and let you know incase I am doing something wrong.
-
RE: Not retaining network IP
@phaedrux I have been using the process as attached for manually setting the ip. The duet doesn’t seem to remember it and next time I switch on I have to start the process again. Am I missing a point in the setup where I should be saving the ip?
-
RE: Not retaining network IP
@phaedrux Thankyou for getting back. My connection is wireless and I have used the same IP address for a few years which was established using the Yat software at initial setup. I assume this is using DHCP. How do I go about defining the reservation as you have suggested. As I said it worked flawlessly for years now I need to use the Yat software to get in and a new IP is allocated each time. Appreciate any help you can give me.