I just installed RRF 3.5.0-beta.3 an suddenly my machine ignores axis limits. The configuration seems ok as far as i can tell:
M564
Movement outside the bed is not permitted, movement before homing is not permitted
M208
Axis limits (mm)s X-95.0:95.0, Y-95.0:95.0, Z0.0:219.8
However when i move the printhead using G1 or the DWC Dashboard the Printhead just keeps going.
Your anti Spam bot is a bit trigger-happy so the full post is on pastebin: https://pastebin.com/tUgPxD8S