Tryed it, but something goes wrong ….
Thats why i included the thingiverse link... 
i used:
Its a google shared link… doesn't seem to work.
Latest posts made by thooijer
-
RE: Build the Hypercube (CoreXY) from Tech2C on thingiverse.posted in My Duet controlled machine
-
Build the Hypercube (CoreXY) from Tech2C on thingiverse.posted in My Duet controlled machine
Wiring the Duet Wifi on this printer was an easy job.
To protect the Duet from high currents of the printer Bed i used a "General Add-on Heated Bed Power Expansion Module" from
the friends at Banggood.
So i am free to use 12V /24V up to 25Amps if i like.
So far pretty impressed with the Duet WiFi thank you David and the rest of the team making it possible! -
RE: Board cannot update firmwareposted in Firmware installation
Last night , experienced almost the same thing.
Updated in the wrong order via the web interface.
Could see a message that renaming failed in the web interface.
Adding the new DuetWifiFirmware.bin to the sd card in the sys folder then M997 S0 would wipe the DuetWifiFirmware.bin file and
gave the error :Firmware binary "DuetWiFiFirmware.bin" not found.
Procedure 3 did the trick, updated to the latest firmwares and webinterface now.