Posts made by tecno

G92 obviously

Error: Failed to home axes ZACD

So on my Pick'n'Place I just want to home X/Y and ZACD set as homed, how to do this?

Are homez -a-c-d . needed if so what content.

@droftarts

OK thanks for your reply

@droftarts
Thanks, is there a way to show the graph in Panel Due?

Where can I see these values in web interface?

***Analog Sensors for Nozzle pressure

;-A"name" Sensor name (optional), displayed in the web interface
;
M308 S0 P"io7.in" Y"linear-analog" A"Pressure_1" F0 B0 C100
M308 S1 P"io8.in" Y"linear-analog" A"Pressure_2" F0 B0 C100

Rest in peace Ian

@droftarts

Thanks for the information Ian, will try to hook it up and see what it does.

Commercial = NO I'm 74years old fart playing around with some toys.

@droftarts
The board was working OK with original controller.
The RX/TX signals are 5V on this board, I have bi-dir levelconverter.

Is this the correct way to setup a second com port?

;***Serial Setup

M575 P1 B57600 S1

M575 P2 B9600 C"io_8" S7

Cheers
Bengt

@tecno said in 6XD I/O >> Issue solved:

@droftarts

Here pics of vacuum sensors = no labels

This is what I have found

MPS20N0040D-D Sphygmomanometer Dip Air Pressure Sensor Module 0-40kPa DIP-6

[https://vi.aliexpress.com/item/1005004022663794.html?src=google&src=google&albch=shopping&acnt=298-731-3000&isdl=y&slnk=&plac=&mtctp=&albbt=Google_7_shopping&aff_platform=google&aff_short_key=UneMJZVf&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en1005004022663794&ds_e_product_merchant_id=109387757&ds_e_product_country=SE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=21634419038&albag=&isSmbAutoCall=false&needSmbHouyi=false&gad_source=1&gclid=Cj0KCQjw3vO3BhCqARIsAEWblcBENDN27oxA7msLr5_lLmacaCHv5tt1BCNc5EVKpbXMww9pwTqv4d0aAvlFEALw_wcB&gatewayAdapt=glo2vnm](link url)

Similar to the Endstop Plugin would be nice

@droftarts said in 6XD I/O >> Issue solved:

Anyway, another problem resolved without recourse to a warranty replacement (which would have exhibited the same problem)!

I am happy as well.

/Bengt

Is there a way to visualise input high/low on 6XD io_1 to io_8?

@droftarts

As 6-8 works with V_OUTLC2 I tried to same setting for 3-5 and now it works.

Cheers
Bengt

@dc42 @droftarts

Possible to concentrate on VACUUM sensors?

@tecno

Does this anything with V_OUTLC1 and V_OUTLC2 to do?

YES IT DOES !!

@droftarts

Not a breakout board.

@droftarts

3 4 5 behave the same. Does this anything with V_OUTLC1 and V_OUTLC2 to do?

@droftarts

Outputs 0 1 2 6 7 8 OK
Outputs 3 4 5 the Led light is not controllable and always on.
config.txt macroszip.txt

@droftarts
Nice with grey hair

Yes all macros checked as regards command and pin#
M42 P3 S0
M42 P3 S1

M42 P4 S0
M42 P4 S1

M42 P5 S0
M42 P5 S1

Tested with DMM and 3-5 works as you describe BUT connecting LED Light on say #5 it is permanently ON so as I see it there is something wrong. Connecting the LED Light to output 7 or 8 I can switch on and off.

Cheers
Bengt

@droftarts said in 6XD I/O >> Issue solved:

rather than testing the outputs on the 6XD:

All testing is on 6XD

The picture was to clarify port 4/5 to be the only way to switch off 4 and 5 loosening cables!

Pls explain why #8 works on #7 if it is as you claim to cabling issue!

Far too many issues points to a faulty 6XD.
Been setting up 4 machines with Mini 5+ and this one is giving one more gray hair!