Posts made by Szilveszter Zsolt

@phaedrux
Ordered in 20 Aug received on first part of September

@phaedrux
https://hobby-store.pl/

@jay_s_uk

• What OS are you running on your PC to connect to the Duet? Windows? What version?
  = we tried on 4 diferent computers;
  -Windows 11 Home, version 21H2, OS Build 22000.978
  -Windows 10 Home, version 21H2, OS build 19044.2006
  -Windows 10 Version 10.0.18363.2274
  -EndlessOS

• Linux should see the port without using a driver
  = the device not appear at all on the computer with Windows or Linux

• Are you sure your USB cable is a data cable? Many are just charging cables, so try another one. Make sure it is fully plugged into the Duet.
  = we tray many cables (we use them for data transfer)

@droftarts
Remove the SD card from the SD card socket, and try connecting via USB and serial terminal again. I would guess that the SD card is causing a boot-loop, possibly because of a bad config.g.
= I tray bat unfortunately is same situation

• if you can connect to DWC over Wi-Fi: upload the firmware in DWC for automatic installation
  = The Wi-Fi is not working (the LED near the Wi-Fi antenna is not lighting)

• if you have functioning firmware on the Duet but no network connection: have the firmware file on the SD card and send M997 via USB
  = The device not appear in the Device Manager at all. Not possible to send anything

• if the firmware has been deleted from the Duet: flash the firmware to the board using Bossa
  = Please explain more about Bossa. Is possible to "flash the firmware to the board using Bossa" without USB connection?

Thank you Zsolt

@jay_s_uk
hi,

@phaedrux said in Duet 2 wont start:

What do you mean write a new one on the formatted SD card?

we have formatted the SD card, and downloaded from the Duet website the following files: Duet2_SDiap32_WiFiEth.bin, Duet2CombinedFirmware.bin, DuetWiFiServer.bin and put is on the SC card.

Unfortunately no Bossa nor Duet ports appear in device manager. We have tried on a laptop too, without connected power, to avoid USB ground loops. WIN power is not connected to the board, from the moment we had communication issues. We tried with more USB cable on all the usb ports from the laptop, and on other 2 computers.

Hello

We have an Duet 2 WIFI
On board is the mark "DUET2 MAIN W41027"
After the first successfully test (we have accessed the webserver over WIFI), after an restart the board don't communicate with the computer. we tried to connect on WIHI or USB without success.
The board led lite as in attached picture. -
We restarted many times without any results.
We erased even the firmware and write an new one on formatted SD card but no success.
The Boar no appear in device manager wen we plug the USB

Thanks for the upcoming suggestions

Sincerely Zsolt