Topics created by Stduplic

@o_lampe ok thx,i will start with default 500 and then test and change from there...

Thank You all... I have ordered them... now just to wait that they arrive and then some printing again 😊😊😊

Thank You !!!
Problem solved 👍 ☺
I wont to express my gratitude towards You. Before I bought Duet3d I have read recensions about peoples experiences with different hardware and particularly important was to me support experience. I have post till now 2 questions that were a problem to me and You responded every time in a matter of hours and point me on right track to solve a problem. In this way, I wont to tell that I am more than satisfied buying Yours product and will for sure buy again. Thank You and don't change please, be like You are now.
Thank You !!!
Now on to my first print ☺ ☺ ☺

@dc42 said in Omron EE-SX 671/R optical sensors for Z probe:

That looks correct to me.

Thank You for helping me to be sure before wiring.
Just one more thing , is it ok to put diode 1N4001 at wire from sensor Out to Z_Probe_IN or it is not needed?
Thx,
Toni