Posts made by sanderboydens

I am having the same problem with my board, I desolderd the wifi module but still i can't get a connection with my pc via USB

the wifi shortet (i think), when it was still on the board de module was getting very hot. I took a look at the U3 chip and at first sight there seems to be no damage of burnmarks

UPDATE: I removed the wifi module from the board, tested it with an arduino and it seems there is a short between the VCC (3.3V) and the GND

The board still doesn't show up on my pc

hello,

If I connect my Duet 2 Wi-Fi (Firmware version 2.02) via USB my pc won't find the COM port. The 5V LED (red), 3.3V (Green) and DIAG (RED) light up. The blue led of the wifi module doesn't light up.

Can somebody help or give me some direction to search what the problem is?

This problem occured randomly.

Thank in advance!!