Topics created by Runklestiltskin

@droftarts Maybe I already do and maybe I am confusing myself. So I have..................

M584 X3.2:0.0:0.2 Y3.1:0.1:0.3 Z3.0 U0.0 V0.1 A0.2 B0.3 E1.0:1.1:1.2:2.0:2.1:2.2 P7

and

M669 K8 A0:0:0:0:0:1:1 B0:0:0:0:0:1:-1; CoreXYUV plus AB force cancelling gantry

Then this

M906 X1800 Y1800 U2300 V2300 A1800 B1800 Z1800 E600:600:600:600:600:600 I20

So in that scenario, taking just the X axis motors, I have 3.2:0.0:0.2. But 0.0 is also U and 0.2 is also A.

So what is the motor current for driver 0.0? Is it 1800 as per the X axis, or is it 2300 as per the U axis?

Edit. And after all the axes have been homed, the P7 parameter in M584 gets changed to P3. Does that then affect/change the motor currents?
Edit 2. Sending M584 P3 then sending M906 reports the same motor currents as having M584 P7 so I guess that answers that question. It's just what is the motor current when a motor is assigned to 2 axes that remains.

@dc42 said in Have some pity.:

e than one fan output isn't working, either the fuse ble

Thanks man.

@runklestiltskin said in z speed when paused/canceled and beyond:

@deckingman thanks again, I thought, that the both had better interchangeablility.

Recent firmware with accept me of the Marlin specific gcode commands but in the case of max speed they just the same gcode, but different units.