Topics created by Rommie

I'm on 1.20.1rc2 on firmware, 1.20+1 for wifi server and, 1.20 rc3 on dwc version. I have set macros up now so I can just use the panel due to reset the wifi turning off then on, I have been speaking to doug and he said to try rolling back to 1.20 on wifi server and try that. Will let ya know how it goes..

There is also another chap on our discord channel that has had the same issues after upgrading his firmware from 1.19 to the 1.20+1 too

Ok I must have overlooked the crimp as I though I had checked them all, seems it was a poor crimp on the 3.3 line, all fixed and working perfect

Cheers dc will check it out

Ok spoke to Doug and I screws up the order I thought I bought a new 24v one but it was a 12v one so ordered a new one and will test it Monday hopefully

The duet board itself for the panel due and ir sensor plugs is perfect and no issues from manufacture